Models > MH1140XMB4 > Instructions

MH1140XMB4 Whirlpool Microwave - Instructions

Jump to:

All Instructions for the MH1140XMB4
121 - 135 of 211
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tom from Missoula, MT
Parts Used:
8183948
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Vent was Broken.
I, carefully, inserted the bottom tabs into the appropriate slots. I then rotated the vent piece up and into place under the top lip of the Microwave. Once positioned I installed the screws required to hold the piece in place. Very simple replacement. It gave me a chance to clean the grease behind the vent.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Benita from Port Orange, FL
Parts Used:
8183851
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
vent grille was knocked loosesomehow. allthe holes for the screws were broken
Removed the screws from the damaged sections and replaced the new vent grille. Less than 5 minute fix, and saved me over a 100 dollars according to the quote I got. Thanks
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lincoln from Spring Hill, TN
Parts Used:
8183851
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The grill that was in place was sagging onto the microwave door
We visited our daughter and son-in-law for Thanksgiving. They asked if I could fasten it so it would stop sagging onto the microwave door. As I looked, I found the screw fasteners were both broken out and the grill was just resting in place. While Thanksgiving dinner was being completed I looked online, found the replacement part and ordered it. The amazing delivery... Ordered on Thursday and delivered on Saturday. It only took a couple of minutes to get the step stool and screwdriver. Then I completed installing the replacement grill.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Foley, MN
Parts Used:
8183948
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Old part broken
Replaced vent with 2 screws. Very easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Emma from Alexandria, VA
Parts Used:
8183851
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Vent grill plastic parts broke off so it would fall off the mircrowave
Took screws off of old vent grille and installed new one. Very easy except my old one was a shiny black grille and this one has a matte finish. Description did not say which but I am fine with the part.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
OLIV from OAKLEY, CA
Parts Used:
W11252182, 4393799
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Foreclosed home: parts were missing
Having the correct model number helps:
Just place the parts in the microwave and it worked.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sadagopan from Frisco, TX
Parts Used:
8183851
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Vent grill was broken
Just remove the old one, inserted the new grill and tightened the screws on the top of the microwave.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from HARKER HTS, TX
Parts Used:
W11707984
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Microwave had no electrical
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Douglas from Eureka, CA
Parts Used:
8183851
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Microwave grill broken...
Unscrewed existing screws, removed old grill, fit new grill into proper slots, reinstalled and tightened screws.
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
alfred from summerville, SC
Parts Used:
8206232A
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burnt Out Light Bulb Replacement
Open compartment, installed bulb, closed compartment
9 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Herb from Auburn, IN
Parts Used:
W11707984
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
it was working fine and it stopped order a fuse and it wasn't the problem
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from SPRINGFIELD, WV
Parts Used:
W11707984
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
4 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from Maceo, KY
Parts Used:
8169438
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The microwave door would not stay latched, so it wouldn't come on.
The repair was easy, I just took off a few screws and found the broken latch spring. The real story is how easy it was to find the replacement spring from Partselect! I couldn't believe they had it, and even better yet, I ordered it one afternoon, and it came the next day with normal shipping! Unbelievable! Then I just popped it in and replaced the covers I had removed and it was working again!
2 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kerry from Edwards, CO
Parts Used:
4393777
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The door cracked and the door handle fell off.
I removed the screws to the old handle and screwed on the new one
32 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jonathan from Portland, ME
Parts Used:
8206444A, 8183851
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
My grill broke
Easy repair and filter change due to factory part and specs.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MH1140XMB4
121 - 135 of 211