YMH7140XFB2 Whirlpool Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Barbara from Kensington, MD
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Our vent grill was cracked
This was a piece of cake! Less than 48 hours to get the part and 3 minutes to find and return the screwdriver and 3 to make the repair! I removed two screws, the old grill and then set the new grill in place and rescrewed the screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julia from Baltimore, MD
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Vent grill wouldn't stay on. The clips broke.
Take out the screws, broken pieces of clip, then put in the new vent grill, replace the screws. Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MICHELLE from BROOK, IN
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Microwave Glass Turntable
All I had to do was open the microwave door and place the turntable on the designated grooves, wha lah it fit. I am now back in business. Thanks to partselect, I found my replacement, ordered and it was shipped in no time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KENNETH from ROGERSVILLE, AL
- Parts Used:
- 8183948
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
vent grill tabs broke off
took old vent grill and tabs off using phillip screwdriver. started putting new grill on and it wouldnt go on. got to looking and there are two more screws that you have to loosen up so the grill will go into place these two screws are between the two tabs at each end. caution do not over tighten the screws it will break the tabs. overall easy to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Albany, OR
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
part of grill plastic became crystalized and cracked
First, the screws were removed that held the vent grill to take off grill. The new vent grill was then replaced in a very short time. No problems at all.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEPHEN from RICHMOND, VA
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Vent Grill
I removed the 2 screws holding the broken vent grill, placed the new one in place and put the 2 screws back in place. Took less than 5 minutes from opening package to replacing the grill.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Coconut Creek, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic vent on microwave was cracked and would no longer stay on.
Removed the broken parts and screws and placed the new vent on and tightened screws. I am an 76 year old woman, so if I could do this, then anyone can! Surprisingly easy to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gloria from Middletown, DE
- Parts Used:
- 8183851
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The vent grille became lose and was falling off from the position each time we open the microwave.
First, I ordered the part.The part was sent to me within 2 days.Then,I removed the old one that was always falling off and mounted the new one. It was a perfect fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norma G. from Poinciana, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The vent grill was broken
I remove the old broken Grill Vent by loosing two screws and just put the new one and adjusted with the same two screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roland R from NORTH ANDOVER, MA
- Parts Used:
- 8206232A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lightbulb burned out
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Martin King from Silver City, NM
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Glass plate of Microwave missing from an in bulit microwave
Glass plate arrived in less than two days. Placed the glass plate in Microwave and presto the microwave works like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DIANA from BORDEN, IN
- Parts Used:
- 8183851
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic tabs broke and the grille fell off.
Removed the screws holding the broken tabs and thought the new vent grille would click right into place. I had quite a bit of trouble getting all the tabs lined up to click into place, but was finally able to do it. Then I just used the old screws to secure the new grille.
Was this instruction helpful to you?
Thank you for voting!
Microwave gill fasteners broke and would not stay in place.
Replaced grill and greese and charcoal filters.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from Palm Harbor, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
vent grill broken at installation screw
old vent off screwed new in less than a minute
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debbie from Tucson, AZ
- Parts Used:
- 8183851
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Vent grille tabs were broken
Replaced it with a new vent grill simply by screwing in on. It works and looks great.
Was this instruction helpful to you?
Thank you for voting!