MH1150XMT3 Whirlpool Microwave - Parts

To access the exterior lightbulb, the bottom panel of the microwave will need to be removed. It is secured in place with screws, so will require a Philips screwdriver to remove it. Screw the new light...

This glass cooking tray, also known as a turntable, is a genuine OEM replacement part for your microwave. The clear glass tray measures approximately 12 inches in diameter, and it is the surface that ...

The grease filter in your microwave range hood is used to trap dirt and debris from the air that result while cooking. A clogged and dirty filter can decrease the efficiency of your microwave, can cau...

This white vent grille mounts on the top of the microwave above the door. Screws For This Grille Are Prt# PS389895

This black vent grille mounts on the top of the microwave above the door. Can be used on stainless models.

This support ring sits underneath the glass turntable tray.

This black vent grille mounts on the top of the microwave above the door. The two mounting brackets are already installed on the grille.

This screw is sold individually.

The microwave door interlock switch prevents the microwave from starting if the door is open. If your microwave will not start when the door is closed, or it continues running if the door is opened, t...

This part protects the microwave by shutting it off if there is an electrical surge.

This part allows power to go one way but not the other.

Handle only. Screws must be ordered separately.