R1511 Sharp Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stephen from Brisbane, CA
- Parts Used:
- CPWBFB076MRU0
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
lcd on sharp r1514 mircowave was illegible
Normal phillips screwdriver used for everything. Unplug microwave, remove top grille (3 screws in grille), remove 1 screw from just above and to the right of the display. Lift panel up, and replace with new board. Have to unplug about 7-8 items and a strip. Would be able to do again in less than 10 minutes, but first time took about 20-25 minutes after spending a couple of hours researching. (some of the research was misleading as you DO NOT have to take the microwave down from range if just accessing control panel)
Was this instruction helpful to you?
Thank you for voting!