Models > R1511

R1511 Sharp Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Vent cover, white
No Longer Available
Selector button
No Longer Available
Touch pad
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stephen from Brisbane, CA
Parts Used:
CPWBFB076MRU0
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
lcd on sharp r1514 mircowave was illegible
Normal phillips screwdriver used for everything. Unplug microwave, remove top grille (3 screws in grille), remove 1 screw from just above and to the right of the display. Lift panel up, and replace with new board. Have to unplug about 7-8 items and a strip. Would be able to do again in less than 10 minutes, but first time took about 20-25 minutes after spending a couple of hours researching. (some of the research was misleading as you DO NOT have to take the microwave down from range if just accessing control panel)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!