Models > MMV1153BAS15 > Instructions

MMV1153BAS15 Maytag Microwave - Instructions

Jump to:

All Instructions for the MMV1153BAS15
16 - 22 of 22
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Yanet from Coral Springs, FL
Parts Used:
DE74-20015G
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Glass tray broken
Simple replace
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Hampshire, IL
Parts Used:
DE91-70063D, 2501-001035
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Microwave would trip ac breaker
It was a over the range microwave It had to be removed off the wall. Once down I removed the bottom plate and then removed the touch control panel. Per the instructions in the user manual tested the transformer it was ok. Next tested the capacitor it tested bad and also the diode tested bad. The parts were ordered from you. The parts installed easily. Reassembled the microwave and tested. Unit no longed tripped the AC breaker and worked heating some water. Installed the unit back above the range.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Paso Robles, CA
Parts Used:
WPW10126786
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
microwave acts like its working but won't heat.
Replaced the magnetron and diode. Microwave works prefect now.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MMV1153BAS15
16 - 22 of 22