Models > SMV9165SC > Instructions

SMV9165SC Maytag Microwave - Instructions

Jump to:

All Instructions for the SMV9165SC
16 - 28 of 28
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from CALIFORNIA, KY
Parts Used:
WPM0805101
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
No power to any microwave functions
Access is via RT. SIDE Panel as you face microwave. There are three screws on the bottom right edge to loosen. After that the side panel slips down and off. the fuse is located in the rear near where the power cord comes in. It is the white ceramic tube 1/4" in dia. and 1-1/2" long. Pull it out like any fuse and replace with new one. Reassemble and you are done!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marilou from Sylmar, CA
Parts Used:
DE74-20016A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Microwave cooking tray cracked
We just order the tray and basically replaced it with the new one we ordered. It fits perfectly. Very happy with the purchase.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Magnolia, AR
Parts Used:
WPDE31-10172A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Turntable motor would not turn food tray
Replaced with new motor from Parts Select. Part was a correct replacement for the old one. perfect fit. Works like it did when it was new. I will recommend Parts Select to anyone. Thank you very much. I would definitely use your company again in the future. I saved $30 by not using parts from GE.
1 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tasha from York, PA
Parts Used:
4713-001165
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Light under the microwave went out
To replace the light bulb was fast and easy. All I had to do was unscrew one screw and place the bulb in! Quick and easy, and simple!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vicki from Phoenix, AZ
Parts Used:
6802A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Microwave Vent Hood Filters
Not so sure this would qualify as "instructions", but I only needed a screwdriver because the "D" rings of the old vent filters broke off and I had to pry to old ones out. Keep in mind, I am mechanically disadvantaged and can barely change an A/C filter ... that being said, all I did for this order was input my Model number and PartSelect found the correct replacement part. I receive the parts super quick (faster than the other 2 purchases I did that day). The only bummer was the packaging ... super huge box for small tiny parts. Otherwise, I now know where to go for replacement parts. This project should be a "no-brainer" for most DYI's, so getting the right parts with just a model number was lifesaving for me :0)
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glenn from Pedricktown, NJ
Parts Used:
DE47-20059B
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Was this instruction helpful to you?
Thank you for voting!
Customer:
Juel from White Bear Lake, MN
Parts Used:
4713-001165
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Bulb burned out
Replaced the bulb
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Tipton, MI
Parts Used:
WPDE31-10172A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
motor was slipping
replaced the drive motor and coupler coupler from samsung parts
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SMV9165SC
16 - 28 of 28