MMV4205BAS Maytag Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sandra from Hudson, FL
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turntable would not turn. The coupler was broken
All I did was removed the glass revolving tray and insert the coupler. Couldn't have been any simpler and the turntable was working again. Part was received the same week it was ordered. Very quick and didn't use any gas to go out somewhere and look for the part. Very pleased!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from Irene, SD
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
piece holding turntable plate broke off
strategically placed coupler in the hole and wallah! placed the plate back on it and watched her go around! Feel like a genius! lol
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Magnolia, AR
- Parts Used:
- WPDE31-10172A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Turntable motor would not turn food tray
Replaced with new motor from Parts Select. Part was a correct replacement for the old one. perfect fit. Works like it did when it was new. I will recommend Parts Select to anyone. Thank you very much. I would definitely use your company again in the future. I saved $30 by not using parts from GE.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elaine from Allison Park, PA
- Parts Used:
- WPDE97-00672A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bought microwave and it had no hanging screws with it.
Ordered part and screwed in. Part could not be found in hardware store even though it was just a long set of screws. Agent quickly identified part with model number of microwave and it was at my home the next morning for installation. Great service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Catherine D from Southampton, PA
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The original coupling holding turntable broke
Took the broken coupling out and put the new coupling in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOE from Grand Prairie, TX
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turntable Not Turning
After contacting parts select they assisted me in ordering the correct replacement part. The folks I talked to on the phone WERE EXCELLENT in working with me to fix the issue. I has ordered a coupler that dammaged after a week of use and they replaced immediately telling me I had a year warranty! Great Company and Thank you it is working perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JIM ODANIELL from WILMINGTON, NC
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rotating Tray fails to turn
Very easy. Opened the Microwave door, removed the dish and replaced the coupler.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Denise from Clovis, CA
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
tray would not rotate
Snapped the coupler in place. Took one minute.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julie from Seattle, WA
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The turntable on the Microwave stopped turning
Asked at Best Buy what our options were after I described the problem. They said to buy a new Microwave. I thought No way it is only a few years old. Whent home did som research and found your site and for under $5.00 My microwave turn table turns again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- al from lexington, SC
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Tray inside would not rotate
Removed old coupler with my fingers and installed new one on shaft. Works fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nanci from Boerne, TX
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken coupling on turntable
Just placed it in. Ordered, received in less than a week and it was working in minutes after being broken for 6 months Thank you!!!!!!!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- penny from akron, OH
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the coupling was broken on my turntable
itt slipped right in, works great. thanks so much. If not for the reviews and no picture of the part, I would not have known what to order. thanks again
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Tipton, MI
- Parts Used:
- WPDE31-10172A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
motor was slipping
replaced the drive motor and coupler coupler from samsung parts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Paso Robles, CA
- Parts Used:
- WPW10126786
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Wrench set
microwave acts like its working but won't heat.
Replaced the magnetron and diode. Microwave works prefect now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- scott from milwaukee, WI
- Parts Used:
- DE67-00213A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Table Will Not Spin
Try to turn Coupler. If it is loose it is broken 1. pull old one out 2. line up keyway on new one and press it in. (If mild resistance was felt while turning coupler it is not coupler most likely drive motor)
Was this instruction helpful to you?
Thank you for voting!