SMH7175BC Maytag Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Matt from Oswego, IL
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
door latch broke off
Use knife to peel back molding around latch openings. Pull down on plastic latch part, pull out bottom and tilt up to remove broken part from spring. Tilt top of new part inward and connect tab to spring. Push in bottom of latch and snap. Replace the molding by pushing all around the door frame.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gerry from North Wilkesboro, NC
- Parts Used:
- DE67-00179A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked coupler.
Pulled out the old and inserted the new/replacement.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dianne from Danville, VT
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door did not stay latched
After removing the door from the OTR microwave, we slid out the old latch, slid in the new, & reattached the spring. Replaced the door & DONE.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Pecatonica, IL
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door latch broken
Used a putty knife to take off the edging inside the door to have access to the latch. Put the new part in and attached the spring. Replaced the edging and job was complete.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BRUCE from LA QUINTA, CA
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door Latch Broken - Door Did Not Close
Got part from you in one day - great- watched utube video on removing molding and reinstalling. Video was longer than time to fix all need to do was remove molding and install the door latch - it is made of plastic with a hook on which to attach spring. Hook breaks and therefore door does not close
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Magnolia, AR
- Parts Used:
- WPDE31-10172A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Turntable motor would not turn food tray
Replaced with new motor from Parts Select. Part was a correct replacement for the old one. perfect fit. Works like it did when it was new. I will recommend Parts Select to anyone. Thank you very much. I would definitely use your company again in the future. I saved $30 by not using parts from GE.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Chicago, IL
- Parts Used:
- R0713676
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light didn't work.
I opened the section with a phillips screwdriver, unscrewed the bad bulb and replaced it with the good bulb.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Tipton, MI
- Parts Used:
- WPDE31-10172A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
motor was slipping
replaced the drive motor and coupler coupler from samsung parts
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia M. from Edison, NJ
- Parts Used:
- DE64-00760A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The door on microwave would not stay shut.
Called Maytag regarding the latch. Was told I had to order an entire new door that would cost around $170 before shipping and handling. Went on partselect and foundt he part for $2.02. Big difference in price. Very easy to install. Hardest part was getting the spring back on. Would definitely recommend to friends.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- outstanding from Galena, MD
- Parts Used:
- WPR9800486
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
microwave would not heat.
hardest part was taking the microwave down off of the wall to gain access to the diode. Thought if was the transformer but ended up being just a blown diode. remove and replace and bench test. that part took 15 minutes . moral of the story don't boil water under the side of the microwave that holds the electric components.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from Pedricktown, NJ
- Parts Used:
- DE47-20059B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
no power
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Bloomfield, CT
- Parts Used:
- DE67-00179A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Turntable not turning
Pulled off the old coupler (stem was broken), pushed on the new one... Voila!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Muhammad from Jersey City, NJ
- Parts Used:
- WPR9800486
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
No Heating.
Information provided on the web site by Part Select, were helpful and encouraging to select and buy the part needed to repair the appliance. No doubt, a skilled person having background in the repair of appliances should attend such repair job.
Was this instruction helpful to you?
Thank you for voting!