Models > MMV1175JW0 > Instructions

MMV1175JW0 Maytag Microwave - Instructions

Jump to:

All Instructions for the MMV1175JW0

Customer:: Gail from Cincinnati, OH
Parts Used:: W11252182
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

glass turntable broke in half, ring turn needed replaced

I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Theodore from SEBRING, FL
Parts Used:: W11025649, W10190018
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours

Wrong mounting plate

Two Mounting plates # PS12074431 were sent to me and both do not fit.
Model number MMV1175JZ-0
Serial number TRX-17. 24546
Manufactured April 2020
Contacted Maytag and even sent pictures to show the problem with alignment of the mounting plate not fit in the back of the microwave.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: DAN from CARPENTERSVLE, IL
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

light bulb burnt out .

Turn off power supply at breaker . Replace old bulb with new bulb .

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: DANNY from SAINT JOHNS, FL
Parts Used:: 8206232A
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out light in microwave

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: George from SANFORD, FL
Parts Used:: W11025649, W10821385
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins

I had a cabinet person install new kitchen cabinets and counter top. After the demolition of the the old cabinets, I had to buy new parts for the new instal

I had the help of a handyman, I'm 75 years young but not handy with tools

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Leon C from MEDFORD, OR
Parts Used:: W11252182
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Microwave didn't have support ring when house was purchased.

Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Theresa from OVERLAND PARK, KS
Parts Used:: 8206232A
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out bulb

Husband replaced the bulb

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jerry from Pine, CO
Parts Used:: 8206232A
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Replacement of hood light bulbs

Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and trying to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Monty from Mansfield, TX
Parts Used:: W10642989
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Replace turntable motor

removed perimeter screws from the bottom side and the lower cover is hinged at the wall side. Motor is visible and easily removed with two screws. Take of the old one, install the new one, and reverse the procedure to put the bottom cover back in place. Will nee helper to hold one side of the bottom until couple of screws can be put in on the other side.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: ken from MARYLAND HTS, MO
Parts Used:: W10892387
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins

Charcoal filter change every six months

Followed instructions in owners manual

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paul from EXETER, NH
Parts Used:: W11252182
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

One of the wheels came off

Took out turntable and swapped out old one with a new bright and shiny
New one, ring that is. It was easy using the part from parts select
Thanks
Paul

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mark from Smithtown, NY
Parts Used:: W11707984
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers

machine was dead.

After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Glen from GLIDDEN, WI
Parts Used:: W11025649
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Mounting plate support edge broken

I removed the microwave to install a back splash and found the support edge on the backplate had broken off and was missing. I searched for parts for the microwave and found them on PartsSelect.com. Easy to order, and was shipped promptly.

Once the part arrived, install was simple, lining up the existing holes. The only hard part was setting the microwave up on the bracket due to the weight and awkwardness of the microwave.

Overall a very simple repair.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Eldon from ORANGE, CA
Parts Used:: W10642989
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Turntable did not work

Ordered a new motor. Removed the outside trim of the oven-microwave combo. 2 screws at the bottom of the trim. Removed the screws that held the combination micro and oven unit in place. Removed the top and bottom black plastic grill of the microwave. 3 screws each. Pulled the entire unit out about 1 inch exposing the screws at each side of the microwave that hold it in place.
Snapped off the top control panel which exposed the wiring connecting the control panel.
Unplugged a couple of wire harness units to free the control panel.
Be sure to label the units to know which goes where during reassembly.
Remove the microwave unit from the housing and place it on its side.
Remove the metal plate that houses the motor. 4 screws hold the motor in place. Disconnect the 2 wires from the old motor and you are ready to install the new motor. Be sure to TURN OFF THE POWER to the unit at the breaker box and remove the turntable from inside the microwave.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Michael J from LORAIN, OH
Parts Used:: 8206232A
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out light bulb which lit the surface of the range.

Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the MMV1175JW0