LMVM2055SW LG Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Had to lift on the door for the microwave to run, suspected the door switches.
Ordered the switches from Partselect, arrive in two days. Had trouble removing the plastic connectors from the old switch terminals, one of the plastic protectors broke, but was able to reuse it. It took a little figuring out how to remove the existing switches. Must push in a tab and rotate the switch on a little pin, then remove. Must be careful not to break the plastic tabs holding the switches in place. Replaced all (3) switches at the same time. All in all it was pretty easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Tucson, AZ
- Parts Used:
- 6871W1A460A
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
The unit would nothing no lights no controls
I checked the incoming power and main fuse. Both are good.removed the microwave from the wall mount, removed the door and outer cover. Removed the right side panel and replaced the main PCB. I found loose mounting screws for the vent fan and other placecs so I tighten all the hardware I could see. Pluged the unit and found the display said input time and date and the lights turned on when the door was opened and the vent worked. installed all covers and checked the microwave operations.
Was this instruction helpful to you?
Thank you for voting!