Models > LMVM2075SW > Instructions

LMVM2075SW (01) LG Microwave - Instructions

Jump to:

All Instructions for the LMVM2075SW
31 - 43 of 43
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Samuel from Daleville, VA
Parts Used:
3501W1A019D
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave would not heat food, but everything else worked.
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Shawn from Seattle, WA
Parts Used:
3550W2L001A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
tab was broken off when changing bulb
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Tucson, AZ
Parts Used:
6871W1A460A
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
The unit would nothing no lights no controls
I checked the incoming power and main fuse. Both are good.removed the microwave from the wall mount, removed the door and outer cover. Removed the right side panel and replaced the main PCB. I found loose mounting screws for the vent fan and other placecs so I tighten all the hardware I could see. Pluged the unit and found the display said input time and date and the lights turned on when the door was opened and the vent worked. installed all covers and checked the microwave operations.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LMVM2075SW
31 - 43 of 43