Models > LMV1813ST > Instructions

LMV1813ST (CSBELGA) LG Microwave - Instructions

Jump to:

All Instructions for the LMV1813ST
31 - 45 of 62
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Harvey from COLUMBUS, NJ
Parts Used:
MJS47373302
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Replace broken tray
I opened the door and slid the tray into place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from WOODBURY, MN
Parts Used:
MJS47373302
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken 14” glass tray
Simply set new tray on microwave rollers and insured glass groves fit on roller .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from PURCELLVILLE, VA
Parts Used:
4370W1A006B
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
The new part was too thick for the worn out plastic ring which is obsolete.
Needed to raise the part to match the ring. I used peanut butter to hold plastic shim while replacing to hold it in place. Built in Oct. 2009.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dick from SANDY, UT
Parts Used:
6600W1K001C
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Microwave fan would come on when door open. Timer and unit would not switch on.
I looked up my problem on the internet and found a very helpful video. Microwave on video was different brand but the internals and methods were very much the same. The video made it simple and easy to fix. Found the replacement switch on the LG parts site and ordered. Two different switch types. One with red switch, the other green. Part was $7.28. Saved a bundle in service costs. Here is the repair video.

https://www.youtube.com/watch?reload=9&v=_AglBJoHgDs
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from OLD TOWN, FL
Parts Used:
3861W2A006A
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
quit working
the repair kit was useless the toggles were to big to go through the top the threads on the bolts interrupted the toggle i had to drill the holes thole to except the toggles I got bolts at the hardware store what a mess
Bob
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rene from MORENO VALLEY, CA
Parts Used:
4900W1A001B
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Wanted to see the instructions before I install it.
Wanted to see the instructions before I install it.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Cedar Park, TX
Parts Used:
6600W1K001D
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Microwave failed to head and light, fan, and turntable failed to come on.
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from CRYSTAL LAKE, IL
Parts Used:
6600W1K001C, 6600W1K001D
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Items were not getting heated up in the microwave,
Easy, and the microwave still doesn't work.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregg J. from WEST CHESTER, PA
Parts Used:
4026W2A019A
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door Latch spring keeper broke
Removed door from microwave and then popped the inside widow trim ring off. Removed 4 screws from the window bracket, replaced the latch with a new part and then assembled.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ernest from Jacksonville, FL
Parts Used:
MJS47373302
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Glass tray broken
really easy
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cesar from Miami, FL
Parts Used:
4370W1A006B
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Shaft socket was worn out
Pop old one out and replaced it with new one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from Oak Ridge, TN
Parts Used:
3B74133Q
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Microwave operated but did not heat
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggested we contact LG for a partial refund. When they tested the unit during re-assembly in my presence, there was a blue flash and the fuse blew. Since we had built a custom tile mural back splash around this unit, I brought it home, ordered a number of time delay fuses new capacitor and two new high voltage diodes. However, using my Fluke DMM, I checked the existing capacitor and high voltage diode and they checked OK so I just replaced the time delay fuse. The high voltage transformer leads had 2 possible ways to connect to capacitor and diode. Tried one way, plugged unit in and turned it on, and immediatly blew the fuse. Replaced the fuse and reversed the high voltage transformer connections,amd turned unit pn, and it worked perfectly. Since we had experienced several power failures during the time of the original failure, the repairer concluded that power spikes might be at fault, so I also purchased a TrippLite ISOBAR4ULTRA 3300 Joule surge protector between wall outlet and microwave, and re-installed over range. It has worked perfectly since.
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marianne from CHURCH HILL, MD
Parts Used:
6912W1Z004B
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
light bulb replacement
very simple
9 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Samuel from Daleville, VA
Parts Used:
3501W1A019D
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave would not heat food, but everything else worked.
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Bloomington, MN
Parts Used:
ADC73028303
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
plastic bosses on front panel broke so screws would not hold
Used screw gun with long bit to disassemble door and then to reassemble.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LMV1813ST
31 - 45 of 62