Models > LTM9010W > Instructions

LTM9010W LG Microwave - Instructions

Jump to:

All Instructions for the LTM9010W

Customer:: Kevin from Colonia, NJ
Parts Used:: 6600W1K001D
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

suddenly stopped working while in use

i unplugged the unit,unscrewed the outer shell so that all the wiring and internal components were visible.starting at the first of three micro switches i removed the slip on terminals installed the alligator clips too the wires so the switch would now be bypassed.i made sure the wires and clips were not touching anything plugged unit in and it worked.i then installed the new switch and closed up the outer shell

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: RICHARD from CARY, NC
Parts Used:: 6549W1S013H
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

microwave turn table not working

Removed the phillips screws from the base.

Using a # 10 secure driver, remove the motor. (I recommend obtaining a secure star driver set to be sure you have the right size)

Replace the spacer, which is a separate part from the motor.

Reinstall the spacer and motor.

Reinstall the bottom panel.

Enjoy!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert from Cedar Park, TX
Parts Used:: 6600W1K001D
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Microwave failed to head and light, fan, and turntable failed to come on.

Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gregg J. from WEST CHESTER, PA
Parts Used:: 4026W2A019A
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Door Latch spring keeper broke

Removed door from microwave and then popped the inside widow trim ring off. Removed 4 screws from the window bracket, replaced the latch with a new part and then assembled.

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Bonnie from New Freedom, PA
Parts Used:: 1B71018G
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The original rotating glass plate split in half.

Although the repair was as simple as opening the box the plate was delivered in, it was the ease of finding the "right" part for our microwave/convection oven. Thanks to Parts Select it was as easy as the click of the mouse!

Was this instruction helpful to you?

Customer:: charles from DENVER, CO
Parts Used:: 1B71018G
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Melted glass plate

I love this microwave...but occasionally someone puts something in it that melts the glass plate. It takes about 2 minutes to find it on the site and order it...wait a few days...and then a second to put it in. It's great to continue to be able to buy things like this at a reasonable price and to keep good appliances going.

Was this instruction helpful to you?

Customer:: Samuel from Daleville, VA
Parts Used:: 3501W1A019D
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Microwave would not heat food, but everything else worked.

Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.

Was this instruction helpful to you?

All Instructions for the LTM9010W