KHMS145JBL0 KitchenAid Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stephen from SPRINGFIELD, WV
- Parts Used:
- W11707984
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jorge from Bay Point, CA
- Parts Used:
- 8204670
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
light bulbs nedd to repace it.
Took the the want burned out , and put the new ones.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Lithia, FL
- Parts Used:
- 8205008
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Replace vent grill
Installation was very easy and only took about two minutes. I am extremely pleased.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Statham, GA
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacement
Easy, perfect
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katherine from Cleveland, TN
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broke glass tray
Arrived in 24hours!!! Great.
Was this instruction helpful to you?
Thank you for voting!
broken vent and door face cracked
removed 2 screws on vent. Door removed 3 screws on inside of door frame that's it repaired
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jocelyne from Fort Pierce, FL
- Parts Used:
- W10850446
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The capacitor was melted in the microwave
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.
Was this instruction helpful to you?
Thank you for voting!
Broken turntable support ring and missing support
Watched video which reminded me to order support for the turntable support ring and did exactly what the person in the video did. Excellent and prompt service and all parts fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CJ from Bullard, TX
- Parts Used:
- W10435116
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
glass turn table would not turn
After researching online, I found that I needed the turntable drive coupling, part#PS993087. when I went to your site it showed the same part but the part number had changed but said it would fit my microwave. Well, I was really surprised and happy when the part I received 3 days after I placed the order, with normal shipping,fit perfectly and now my turn table in my microwave works. I have marked this site a a favorite and will use it I'm sure soon. Being a single women and having to figure out how to fix the things on a small buget, I'm learning a lot and have a lot of respect for men that know how to do all the repair stuff. Thanks so much, I have been able to mark this off my list of things to fix. Have a nice day. Cj- age, 58
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ray from Port Charlotte, FL
- Parts Used:
- 8184149
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Microwave outer door panel was creacked
Others had suggested using a putty knife to "gently" remove the outer door panel. I found my narrow blade putty knife was not sturdy enough. After several attempts I finally switched to a wide blade putty knife and blade screwdriver. This did the trick. Outer door panel came away and after that it was relatively easy repair. I was really impressed by the wwll protected packaging used for shipping the new panel to me.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Huntington Beach, CA
- Parts Used:
- 8184581
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Microwave was making a grinding sound
Problem was easily diagnosed using the internet as a resource, problem was a bad stirrer motor. Hardest part of the repair was the removal of the microwave. Once off the wall, you remove the outer cover and a molded plastic casing directly underneath the outer cover at the top of hte microwave to expose the stirrer motor. Removed two screws and two wires and the old motor is out. Did exactly the opposite to install the new motor. The kit I recvd included among other things the motor, a new inside cover, plastic rivets and even silicone to seal the inside cover. I am sure I saved a couple hundred dollars by doing myself.
Was this instruction helpful to you?
Thank you for voting!
Microwave made a heavy buzzing sound and then stopped heating
Removed cover (lots of screws), Removed base, Removed inside covers to epose transformer, HV diode, capacitor and Magnetron. Removed HV transformer and labeled wires. Removed door switch. Removed Magnetron and replaced. Re-installed door switch and HV transformer. Connected wires and re-installed internal covers. Installed base and tested unit. Installed cover and re-installed Microwave. Has been running a week just fine. Take a lot of pictures with your phone during the whole process. This will help with getting things back exactly as factory.
Was this instruction helpful to you?
Thank you for voting!
Door handle cracked and front door panel cracked
After removing the three screws from the outside edge of the door , use a flat blade screwdriver and you fingers to pry the base of the front plastic panel off the door. The cover is held in place with molded in plastic clips . If you are just trying to swap the handle, I'd suggest you buy a new plastic door panel as it's tough to remove without risking it cracking (sorry it is quite expensive...but MUCH cheaper than a new appliance). Once removed, the glass outer window has to be removed by gently prying back the plastic clips that hold the internal bezel that hold it in place. You'll have to take the screws out of the old handle and re-use them . I backed up my screws with penny washers to spread the force applied to the plastic panel...probably the cause of the cracking in the first place. On reassembling (the reversed of taking it to bit) make sure the glass is clean on the inside (no fingerprints) before you snap everything back together. I gave it a "bit difficult" because if you don't act with finesse, you'll crack bits that you don't want to crack!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maxine from Georgetown, CA
- Parts Used:
- 8184592
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Outer door on this microwave was cracked.
What was amazing is that the part arrived the day after I ordered it, it was a perfect fit. We simply unscrewed the old door and put the new on on. Had a little trouble making it fit, but we used a little more pressure and it popped right on, we screwed it in place. Thank you for your fast delivery
Was this instruction helpful to you?
Thank you for voting!