KBMS1454SWH0 KitchenAid Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lisa from Happy Valley, OR
- Parts Used:
- W11373838
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I broke my microwave glass tray
Honestly, I was afraid to order from this website, but after reviews, I placed my order, and 2-3 days later, my glass tray was replaced in my Microwave! I was freaking out because you just cant go back to Sears or Standard Brands and get a new one...everything is on-line. Im VERY happy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken R from Eagan, MN
- Parts Used:
- WPW10124269
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
LCD display lost some lighted bars that form the numbers
Removed microwave from wall (it is a built-in). Removed top of cover. Removed 4 screws that held the front panel. Pulled front panel out. Unclipped LED Display from holder. Unplugged the 2 flat cables. Removed old Display. Inserted new Display. Clipped Display in place. Plugged the 2 cables. Reinstalled front panel. Reinstalled cover. Plugged into outlet and tried it out. Viola! Reinstalled into wall.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curtis from San Jose, CA
- Parts Used:
- W11223840
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
The shaft on the turntable drive coupler was longer than the original one that was broken..
All other measurements were similar and fit properly. The drive shaft of the coupler was TOO long by about 3/16". I had to cut it down to the size of the original OEM shaft using a fine cut hack saw. Seems to work perfectly now....
Was this instruction helpful to you?
Thank you for voting!