KHMS1850SWH0 KitchenAid Microwave - Instructions

Replaced light bulb.

Arrived in 24hours!!! Great.

This is an over stove top mounted oven. Remove oven from mount and place on a work surface with padding to support the lamps and vent holes. Strip the case off and locate the noted other "most likely" parts. Watch out for the Capasitor. Read the test note available for each part; Diode, Thermister Fix, Capasitor and Magnitron. Do the test checks. My issue wasn't obvious because I think the Capasitor was discharged and needed to be hot to check the Magnitron. (I'm not an electrical engineer so...) At this point I did the foolish thing...I plugged the unit in and ran it. Watching from a distance I saw sparks fly from the top side of the Magnitron with the same result from my cup of water (cold-no sprks here.) I replaced the diode and tried again, same result. I ordered the Mag and the Thrmst-Fix. Thrmst-Fix was on BO when the Mag got here so I installed the part. Had to remove several pieces to afford room to work and still had to stretch and pry to get the old out and new in. Mag is held in place with Torx screws so check that before you start. No other tool works. Mag was the problem for this unit. Some problems encountered: Parts and pieces were quick in arriving as long as they were not Back Ordered. Be careful to follow a thread for your product to order parts. These review/instructions are mixed for simular appliances and sometimes lead off to other part lists and numbers. Prices differ from model to model, list to list and the part numbers change. Go back to your product and then trace for the correct parts. I noted a $40 price dif.between Magnitrons from simular part lists. When you receive the part check to match the part numbers, Manuf. no. are different from the Part Select No. but can be crossed. Otherwise using this site's instructions, checks, insulated tools, big rubber gloves and a face shield I managed to save a $600 machine from the junk pile. Parts as ordered were recieved and return of un-touched parts were accepted by Parts Select without unexpected hassle. Thanks for a positive experience.

just replace need cooking tray

Simply placed new dish on the rotating hub.

followed on-line instructions and it was very easy to do. just seperated the inter-door from the outer-door and exposed the 2 screws. lined up the door handle with the scr and screwed the handle on. snapped the doors back together and it was done.

Removed the glass cover and replaced the bulb. Very simple.

Used the new parts, they were a perfect match, I completed the work in 5 mins or less. The pictures provided were very helpful, and parts were delivered very fast. Price was the lowest too!!

Replaced--tightened. Work involved--tighten two screws. The diagrams provided by your site were excellent. Delivery time was faster than expected. Don't usually bother with endorsements. But good job--keep up the good service--its appreciated--when something works the way it is supposed to.

Easy, perfect

The part was shipped quite fast. I received it after 3 days of my order. Installing the part was a breeze. Took about 5 minutes. The part was as described and looked identical to the original one.

Attached bracket to wall with screws and hung microwave oven. Very easy project.

Remove the screws from the unit metal tabs. Insert two locator tabs of the grill into the slits in the unit and install the two mounting screws. SIMPLE

Unscrewed light cover then inserted lights. When I called your company gave them the model Number they knew the exact part needed promptly mailed the replacement lights.

You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.