KHMS1850SSS2 KitchenAid Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- George from Maceo, KY
- Parts Used:
- 8169438
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The microwave door would not stay latched, so it wouldn't come on.
The repair was easy, I just took off a few screws and found the broken latch spring. The real story is how easy it was to find the replacement spring from Partselect! I couldn't believe they had it, and even better yet, I ordered it one afternoon, and it came the next day with normal shipping! Unbelievable! Then I just popped it in and replaced the covers I had removed and it was working again!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Winter Park, FL
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken cooking tray. Food not heating evenly.
Simply placed new dish on the rotating hub.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Statham, GA
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replacement
Easy, perfect
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- keyur from erie, CO
- Parts Used:
- W10250593
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Vent Grille
The part was shipped quite fast. I received it after 3 days of my order. Installing the part was a breeze. Took about 5 minutes. The part was as described and looked identical to the original one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Reno, NV
- Parts Used:
- WPW10269225
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Missing bracket for mounting microwave oven
Attached bracket to wall with screws and hung microwave oven. Very easy project.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Singer Island, FL
- Parts Used:
- W10250593
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Mounting Screw Tabs broke and grill falls off
Remove the screws from the unit metal tabs. Insert two locator tabs of the grill into the slits in the unit and install the two mounting screws. SIMPLE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katherine from Cleveland, TN
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broke glass tray
Arrived in 24hours!!! Great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darrell from Oklahoma City, OK
- Parts Used:
- 8205146A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Microwave had no charcoal filters in the lower area just above the cooking range.
I simply removed the mesh guards in the bottom of the microwave ad placed the new charcoal filters behind them and replaced them in the slots under the appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Sparta, NJ
- Parts Used:
- W10250593
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The vent grille is plastic and not very durable.
There are two screws that hold the unit on. Very simple to install. When you clean the vent grille don't push too hard on it or you will be replacing it again...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Springboro, OH
- Parts Used:
- W10250593
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Vent grill sttachment points were brokek off...a VERY poor drsign with a weak material(I used to be in the plastic molding business)
Took out the screws and replaced the vent. (here is a trick, to make getting the screws in a rather hard to reach area I glued them to the end of the screwdriver-super glue)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Otha from Missouri City, TX
- Parts Used:
- W10113040A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed A Replacement Filter
Slide the old one out of the slot and insert the new one in its place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vanessa from Atlanta, GA
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken glass cooking tray for microwave
Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Rhinelander, WI
- Parts Used:
- 4393799
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken glass microwave tray
Tray arrived in a short period of time and was a perfect match.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Clinton, MO
- Parts Used:
- W10709921
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burned out Halogen Bulb
Unscrewed light cover then inserted lights. When I called your company gave them the model Number they knew the exact part needed promptly mailed the replacement lights.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- roger from palm coast, FL
- Parts Used:
- 8206232A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replace light blub
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.
Was this instruction helpful to you?
Thank you for voting!