Models > KHMS105WBL1 > Instructions

KHMS105WBL1 KitchenAid Microwave - Instructions

Jump to:

All Instructions for the KHMS105WBL1
31 - 45 of 62
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Glenn from Temecula, CA
Parts Used:
815065
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Handle broke off
Third time I had to do it. For some reason the handle breaks on this model. The unit is 16 year old. It was one of the first over oven microwaves (built in)ever made. Just remove cover panel with a bread knife. Then use a phillips screw driver and your done. Put the cover panel back on and this microwave has been a work-horse for the past 16 years and still ticking.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LENNARD from BURNSVILLE, MN
Parts Used:
4392027
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Would not start
Watched a you tube video prior to installing new switch. Followed the video which gave me confidence i was up to the task. After removing the touch pad I found my design was not exactly like the you tube model but I found the defective switch, replaced it and put the microwave back together. Works great. Again watch the videos
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael J from LORAIN, OH
Parts Used:
8206232A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out light bulb which lit the surface of the range.
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Craig from Swansea, MA
Parts Used:
WPR9800384
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
One of the shelf plastic holder was broken
I was able to find the part on line and within a few days received the part and installed it with no problems thanks to the website drawing information.
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bert from Naples, FL
Parts Used:
4158731
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Cracked lower shelf
Found correct part number, ordered, then installed.
Ordering was quick and easy. Delivery of shelf was very fast.
Very satisfied with everything.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rajendra from Rochester Hills, MI
Parts Used:
4158731
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Ceramic Tray had cracked
Simple slide the tray into the groove
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roland R from NORTH ANDOVER, MA
Parts Used:
8206232A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Lightbulb burned out
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
alfred from summerville, SC
Parts Used:
8206232A
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burnt Out Light Bulb Replacement
Open compartment, installed bulb, closed compartment
9 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Farmington, NM
Parts Used:
815066
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door handle broke off
Popped out the two little plugs, unscrewed the broken bits and left the screws in the door...after reading someone else's feedback about the door being hollow and dropping the screws I thought this was the better part of valor....screwed the handle back on, popped the strip in place and presto change-o it was fixed. Easy as pie!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ray from Gatlinburg, TN
Parts Used:
8206232A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out light bulb
Replaced light bulb.
Was this instruction helpful to you?
Thank you for voting!
Customer:
roger from palm coast, FL
Parts Used:
8206232A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace light blub
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Clinton, CT
Parts Used:
815065
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The door handle broke off.
Unscrewed the broken handle, and screwed on the new one. My new handle arrived one day after placing my order.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff from Beecher, IL
Parts Used:
815066
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door handle was broke on the top mount
I took the plastic caps off the door to reveal the screw heads (Phillips) pushed on the screws to push the handle out of the door. then with the screw driver and a skinny object (pencil) I pushed the screw out with the screw driver and pencil so I would not lose the screw in the hollow door. we were using the door in the mean time waiting for the handle to come. if you were not there would be no reason the take the screws out. install the new handle being careful not to push the screws out of the hole and snug them up. just tight enough to keep handle from moving so as not to crack the plastic handle. snap the cover on with a little supper glue, done. very easy swap.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timothy from Surprise, AZ
Parts Used:
815066
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken handle
unscrewed the 2 broken ends, one at a time, careful not to let the screws drop inside the door. (keep inward pressure on the screw) Attached each end with the same screws. Completed in less than 5 minutes
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carter from McCordsville, IN
Parts Used:
8206232A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burn't out bulb.
Removed the glass cover and replaced the bulb. Very simple.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KHMS105WBL1
31 - 45 of 62