Models > KCMS1555RSS0 > Instructions

KCMS1555RSS0 KitchenAid Microwave - Instructions

Jump to:

All Instructions for the KCMS1555RSS0
61 - 70 of 70
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Frank from New Bern, NC
Parts Used:
WP8205451
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Door latch bracket broke
The only reason it took over 30 minutes was that the unit is a built in over the stove type installation. The special Philips like screw driver which I purchased was the wrong size. I had to use a small vice grip tool to remove and reinstall these screws. The suggestion to use a butter knife to spread the slot was a good one. The delivery from part select was amazing. We were not without our micro more than a few days
Was this instruction helpful to you?
Thank you for voting!
Customer:
alfredo from round rock, TX
Parts Used:
WP8205451
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
door would not open when depressing the"push to open" button.
1.ordered the part 2.during wait time for part,i epoxied the broken ear of the door latch bracket back on to the broken part.3.waited 24 hours for epoxy to set,4.installed the repaired part.5.reassembled the microwave and reinstalled in the wall unit.6.days passed and the ordered door latch bracket finally arrived.7.we are using the microwave daily with the repaired door latch bracket,but we will keep the new part in reserve,just in case!JUST CAN NOT DO WITHOUT OUR MICROWAVE!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KCMS1555RSS0
61 - 70 of 70