Models > 66561619101 > Instructions

66561619101 Kenmore Microwave - Instructions

Jump to:

All Instructions for the 66561619101
91 - 105 of 250
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Paul from EXETER, NH
Parts Used:
W11252182
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
One of the wheels came off
Took out turntable and swapped out old one with a new bright and shiny
New one, ring that is. It was easy using the part from parts select
Thanks
Paul
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alma from Florence, SC
Parts Used:
6802A, 6800
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
smoke alarm went off while frying
both of the pieces have a tab that help remove the pieces. They slip right out and new ones are putin place.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from SIOUX FALLS, SD
Parts Used:
8183948
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
I took off the wrong way and Broke it
Took 4 Screw on top off...set bottom in first into slots ..pushed top in under the top of outside cover ...put Scews back in.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathryn from Everett, WA
Parts Used:
8183948
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The grill broke when removing it to clean
Unscrewed two screws, fit the grill into place and screwed in two screws.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
george from GULF BREEZE, FL
Parts Used:
8183948
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Old vent fell apart
Slipped in and screwed top on
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from SAN ANTONIO, TX
Parts Used:
8183948
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Vent grill replacement
Unscrewed 4 different screws, replaced the vent & returned screws. Ack to original positions
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cleveland from CAPE CORAL, FL
Parts Used:
8183852, 6800
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
The air filters were fine. The Front grill did no or could not fit. It too big however, not bu much, just enough so it will not fit the space. If it could fit the space with enough room to close the door I could screw it in
PRAY !Pray hard
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dan from HOLLY LK RNCH, TX
Parts Used:
8183851
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Clips on grill broke
Removed bed two screw replace grill
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Monty from Mansfield, TX
Parts Used:
W10642989
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replace turntable motor
removed perimeter screws from the bottom side and the lower cover is hinged at the wall side. Motor is visible and easily removed with two screws. Take of the old one, install the new one, and reverse the procedure to put the bottom cover back in place. Will nee helper to hold one side of the bottom until couple of screws can be put in on the other side.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
bob from SEBASTIAN, FL
Parts Used:
8206232A, 8169539
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
light that illuminates the range would not work.
replaced the socket per recommendations on this web site. this did not correct the problem.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tabitha from STAFFORD, VA
Parts Used:
4393913
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Door Latch
Whirlpool Model# MH1150XMS-0 purchased in 2004. I called Whirlpool and they suggested a new microwave. No big surprise - being the thrifty person that I am I wasn’t taking this for an answer. I figured if I had to purchase a new microwave what was $35.22 (part# PS373828 + shipping) if it worked.

I replaced the latch on the microwave door. Once the latch was replaced. I also took this time to make sure that the microwave door was in alignment. Thereafter, I had to adjust the door interlock switch behind the microwave console panel to recognize the microwave being closed. Yes, gaining access to all these areas was a bit difficult but have patience. TADA!!!....microwave is working. #girlsrock
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from CENTENNIAL, CO
Parts Used:
W10435116
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Drive coupling cracked would no longer rotate turntable plate
used screw driver to pry up old part. lifted right off. line up drive couple drive push on. repair took less than 1 minute to repair. works like new
Very Pleased with Parts Select replacement parts
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jan from ELK GROVE, CA
Parts Used:
W11252182, W10435116, 4393799
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Very unusual. we had a brief fire inside the microwave which destroyed all the moving rotary parts.
First, we had to clean up all the interior surfaces, which was just cleaning. There was no internal damage. Then, just setting the center connector, rotary rollers and glass plate. Simple
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ROBERT from LEESBURG, FL
Parts Used:
8183852
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
existing vent grill cracked
the new part fit just right. put in place and screwed in with existing screws. like a glove.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from FRANKLIN, TN
Parts Used:
8183851
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Microwave vent cover broke as it was cleaned.
Bought a new one. Perfect match, easy replacement.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 66561619101
91 - 105 of 250