JVM1870SKC01 General Electric Microwave - Instructions

Took out the screw holding the old motor, unpluged it and reversed the procedure to install new part. My wife is now very happy!

Repair was simple. Remove screws on bottom panel of microwave, let cover hang on hinges. Remove two screws from drive motor, remove old motor, insert new motor, replace two screws, then reattach bottom panel. Done!

Quiet has returned to my microwave:-)

I also discovered that the (night light) bulbs are much easier to replace when the bottom panel is lowered.

The ground shipping took less than three days. When I got home from work the part was at home. While I was having dinner I told my 17 year son to get a phillip screw driver. He unplugged the power from the wall. He removed five screw from the bottom of microwave. He then removed one screw from the drive motor, disconnected motor plug, reconnected the plug to the new motor, placed back one screw on the motor and screwed back the five screws. Tested the microwave and the tray was turning successfully. It took my son less than five minutes. Real easy and highly recommended.

Ridiculously easy, unscrew, and change bulbs. Having the correct bulbs made all the difference, I did not have to waste time looking for the correct one.

I removed the 7 screws on the cover for it to drop down. Then disconnected the 2 plugs from the motor and removed 2 screws that was holding the motor in place. Connected the new motor to the plugs, screwed back in place, and then screwed the cover up. Total time: approximately 15 minutes. I suggest you put a towel on top of the stove for protection. Easy to do. Thank you.

Part arrived sooner than expected---great service!!!!Simply drop down the light/grill panel under the unit--it's hinged in the rear. Unplug and unscrew the motor --replace in reverse order. Done PS -Local GE sales and repair could not get this motor. Said GE no longer provided , too old---6 years

Used a phillips head screw driver and loosened the lens frame under the microwave. Removed the broken lens and replaced it with the lens ordered. Put the lens frame back in place and secured it with the phillips head screw.

Removed the 7 screws fromthe bottom of the microwave and the bottom cover hinges down. Then remove the two screws holding the motor,next unplugged the motor and reversed the process to re- assemble. Worked like a charm.

grandson removed 6 screws.,pulled cover down, removed 2 screws holding drive motor, removed old,replaced new, replaced 2 screws, and then 6 screws and tah-dah!!.. silent turntable--++I ordered part on Monday afternoon and less than 24 hrs, it was here. Thanks

took glass cover off being an electrician and saw lamp or bulb was burned out. googled your site and with model number.went on partselect found lamp,orderd it.2 days later lamp arived installed lamp. So easy no running around or making several calls

Only needed a phillips screwdriver to remove screws from the bottom of the microwave. Unplugged the motor, removed the two screws holding it in place, put the new motor in place replaced the screws, and replaced the bottom. It took about 10 min.

Received the replacement part within two days of odering same. Removed 5 screws to drop the bottom cover. Removed 1 screw to remove the defective drive motor. Installed the new drive motor, necessary screws and drive spindle in reverse order.

All one has to do is use a screw driver to remove the screws, one per lens.
Then lower the lens bracket, bend the 4 tabs holding the
lens, remove and replace the lens and screw the brackets back in place.

Less than 10 minuits.

removed the 6 screws that holds the bottom cover.
the disconect the two wires.......remove 2 screws that holds the element. replace new element with the 2 screws connect 2 wares add the bottom cover connect the 6 screws . so easy .and saved service call plus money, thank you do it yourself.

I went online and very quickly was able to order a new motor from PartSelect.com . It was at my house in a few days. I quickly installed the new motor and Voila! the cooking tray now turns the way it's supposed to! Thank you, PartSelect.com!