JVM230WLC01 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Skillman, NJ
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave handle broke off
I removed broken handle, then simply attached the new handle with two screws.
Was this instruction helpful to you?
Thank you for voting!
Microwave will not start
Removed three screws from the top front cover and slide it out and following I removed the touch panel and the housing that holds the switches and replaced the bad one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEPHEN from Albany, GA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken handle
Exact Fit, Took about two minutes using phillips head screw driver.No problems
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rick from Muncie, IN
- Parts Used:
- WB24X829
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
microwave Quit working but lights worked
llation
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Aubrey from Silver Spring, MD
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Handle was broken
Removed old handle. Cleaned area on microwave door. Screwed hanle on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from MAYSVILLE, GA
- Parts Used:
- WB24X830
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave would run but not heat
Removed the control panel, one screw at the top. Removed 2 screws on the door switch holder and removed the door switch. VERY EASY.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from UNIVERSITY PA, MD
- Parts Used:
- WB36X10003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
bulb burned out light that is under the microwave, which lights the oven below.
thank you for the video--very clear, responsible, applicable although the illustration was not exactly of our kind of light. the bulb was exactly like the one Hotpoint used in its microwave made in 1989! I will come back to you for parts in the future. (You have the model # from my original order.)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darenda from Houston, TX
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The handle broke at the bottom.
I removed the existing screws and removed broken handle. Wa able to still use existing screws and install new handle. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Concord, MA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave oven handle broke loose at bottom of door.
Philips Head #2. Two srcews out....two screws in. A perfect fit!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from TREASURE IS, FL
- Parts Used:
- WB36X10003
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Under the microwave there are two light bulbs that light up the top of the oven/range.
Last week I removed the glass cover that was held in by one screw and removed the burnt out light bulb. I ordered the bulb and left the glass cover off until the bulb arrived. I had to wait until this evening to put the glass cover back on and fasten the screw because I have a window right next to the oven and the sun streaming in made it too difficult for me to see how to put the glass back in and replace the screw.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vance from Alexandria, VA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door handle on my Space Saver Microwave broke at the screw mount
It was very simple...there were two screws on the inside of the door that held the handle. Removing the screws was easy and the new handle lined up perfectly. I replace the screws and the whole event took less than 15 minutes. The handle arrived from PartSelect the day after I ordered it and even though they had projected 3-5 days for delivery.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gerard from Naples, FL
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken door handle
Real easy------Removed two screws, handle & replaced same.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jorge from Pleasanton, CA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
the handle was broken
just screwed the new part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from Santa Rosa, CA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door handle broke
I removed the one screw, the other end was broke. Replaced the handle. At first it didn't screw in tight, so I turned it around and put in both screws and bingo, good as new. Thanks for your quick response. Was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Berwick, IA
- Parts Used:
- WB15X322
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Door Handle
Removed 2 screws. Placed new handle in position. Installed 2 self tapping screws. 2 Minutes to find phillips screwdriver, 1 minute to install screws.
Was this instruction helpful to you?
Thank you for voting!