JVM1653SH06 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lucrecia from Bothell, WA
- Parts Used:
- WB49X10176
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken glass tray
Replaced the tray.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Socorro, NM
- Parts Used:
- WB27X10928
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Quit working
Just like the directions said. Very simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Dittmer, MO
- Parts Used:
- WB06X10689, WB49X10176
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing parts
open box and installed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lois from Sarasota, FL
- Parts Used:
- WB49X10176
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The glass microwave turntable for the microwave was dropped and it brokd.
Opened the box, put the glass turntable on the center fitted over the three little bumps.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danny from Louisville, KY
- Parts Used:
- WB36X10328
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
lights were burned
It was REALLY EASY finding the right parts using your diagrams..Thanks for your HELP!!I will definitely be back.Dan H
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mohammad from Piscataway, NJ
- Parts Used:
- WB27X10928
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Powered Off completely
After reading reviews that there was no power what so ever and a fuse replacement will solve the problem, I tried it. Replacing the fuse is very easy (and I am not handy at all). All you have to do is remove the microwave cover from the top by removing two screws, slide the cover to the left and pulling the cover off. Then remove the grill in front of you, by removing one or two screws. The fuse is in front of you, use pliers and be firm but gentle. Replacing the fuse is easy but it did not solve my problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Douglas from Chelsea, AL
- Parts Used:
- WB06X10359
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our Microwave was missing the grease filters
Ordering was easy and instillation even easier
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from East China Township, MI
- Parts Used:
- WB27X10928
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
All power to the microwave went out.
PartSelect had helpful repair instructions on-line which made the repair easier and faster. Unfortunately, there were other problems with the oven that immediately blew the new fuse I had just installed. It was then determined that additional repair would most likely cost almost as much as a new microwave.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marc from Edmond, OK
- Parts Used:
- WB07X10967
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
top of the grille screw bracket broke
took off the old grille and put new one on and lined it up properly and screwed it in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Minneola, FL
- Parts Used:
- WB26X10135
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
microwave turntable not working
working changed out the motor that arrived within 2days. Great Service and thank you so much.Brian Kerry
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Keizer, OR
- Parts Used:
- WB55X10813
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The front door decritive trim frame broke off
FIRST OFF I'd Like to say. I phoned my cities Appliance Repair Specialist. He didn't return my call. I rephoned and got him. Told him I need the Door frame. He said GE would make me buy the entire door so just by a new Microwave from him. I went online and this was the first sight I found. Typed in my Make and model number and up popped a scematic. I hit on Door and there it was all layed out in pieces. I hit the front door frame and BOOM Payed for it and two days later it was here. BRAVO to you folks. Since most of the front trim frame had fallen off I just had to pull a little around the outer edges to get the rest of it off. I noticed when I ordered the New Part from you that the front door handle was held on by two screws from the backside of the door. When I looked and couldn't see them I knew they had to be under the inner plastic frame work on the backside of the door. SO I kind of pulled on it at various places around it's edges and it started to pop OFF and I worked it off. Removed the screws and handle that held that last part of the front trim frame. Snapped in the new one. Reinstalled the door handle and snapped the rear door panel back on and it was DONE!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Medford, NJ
- Parts Used:
- WB07X10967
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Grill vent broke and fell off.
Microwave had to be dropped down about 3 inches from the mount,two upper screws removed replaced old vent with new and replaced screws but didn't make them too tight.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from Purlear, NC
- Parts Used:
- WB55X10813
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Outer door panel was broken for the second time
The door comes off fairly easy. Removed the snap on plastic cover. This could be easy to break. The center part of the door just snaps out but the glass is a bit difficult to get out and back in. You have to pull the new panel out some to get the glass in without pulling to hard to avoid breaking the new one.Once the glass is in you simply snap the center part back in and screw the handle back on. Then snap the plastic cover back in and hang the door back on the unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Earl from New Philidelphia, OH
- Parts Used:
- WB24X10047
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave would turn on ,BUT turn table would not turn and oven would not heat.
Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ralph from baton rouge, LA
- Parts Used:
- WB55X10813
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
broken door frame (3rd time)
Lift the door off set on thick towel and carefully slip the knife around the back edge of the door and pop it off and then unscrew the handle and unclip the front panel slowly and replace. Get an illustration of the layered parts from the partslect website. Be patient as the glass is a tight fit and will be a pain. Good thing is that it is an original GE part, not cheap knockoff although the GE door design is rather dumb so that it should break this maney times with no kids using it.
Was this instruction helpful to you?
Thank you for voting!