Models > PSA2201RSS01 > Instructions

PSA2201RSS01 General Electric Microwave - Instructions

Jump to:

All Instructions for the PSA2201RSS01
106 - 120 of 156
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Shirley from Collins, MS
Parts Used:
WB25X10019
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light on hood of microwave burned out.
Removed tiny screw from under the microwave that held the lid shut where the light was located. Took out old bulb and replaced with new one. Very easy!!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Margaret from Reno, NV
Parts Used:
WB25X10019
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Light bulbs had burned out.
I myself had difficulties replacing bulbs, as I have no feelings in my fingers, so I asked my son while holding the bulb in the bubble wrap, He had no problems what so ever.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Chantilly, VA
Parts Used:
WB25X10019
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave interior lamp burned out
Unplug the microwave. Remove front grill and cover by removing 2 screws on top of microwave. You have to look down from the top. I could not locate the screws by feel. Once the two screws are out, remove the grill by sliding slightly to the left to lift out. Open the oven door to facilitate removal. Then remove the steel light cover (1 Phillips screw in the center of the unit) and unclip the bulb holder on the right. Do not touch the halogen bulb when you replace. Reseat the bulb holder and test by plugging in the unit with the door open. Unplug and replace the light cover and grill.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Arthur from Boynton Beach, FL
Parts Used:
WB25X10019
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out bulbs
One screw out - drop panel - remove and replace bulbs!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Don from Stephens City, VA
Parts Used:
WB25X10019
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 bulbs in the lower part of the unit had burned out.
Removal of the bulbs was easy; reinserting was not as easy due to the configuration/placement of the bulbs in the unit. It was interesting that a simple suggestion to keep the bulbs covered with some of the packing material made sense as to not directly handling the bulb itself and causing any contamination of the bulb(s).
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from Pensacola, FL
Parts Used:
WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
turntable broke
No repair involved, just replaced......looked online and ordered, thought it would take 4-5 days, came in perfect condition within TWO 2 days. awesomeness
Was this instruction helpful to you?
Thank you for voting!
Customer:
Maxine from Flagstaff, AZ
Parts Used:
WB48X10064
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
No rack in the Convection/Microwave
Just placed the rack in the Convection/Microwave oven and baked
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephanie from Kernersville, NC
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
microwave won't heat
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Reno, NV
Parts Used:
WB25X10019, WB06X10554
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Needed New Holder Assembly and bulb
Replaced the cord, attached it to the light fixture, and then replaced the cover for the bottom of the appliance
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bonnie from Lutz, FL
Parts Used:
WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken turntable
just opened the microwave door and inserted tray
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rong from Portland, OR
Parts Used:
WB20X10048
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
circuit shortage shows, i thing it because i heat on the counter too long cause the thermotart not fumctional.
it work ok now
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rosalie from Oakdale, NY
Parts Used:
WB25X10019
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Halogen Ligjt bulb needed replacing
We followed the instructions on your website and it was very quick and easy. Thank you so much for having that information and showing exactly how to replace the Halogen Light Bulb.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jean from Princeton, NJ
Parts Used:
WB25X10019
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Interior lightbulb needed to be replaced
I could not for the life of me figure out how to get into the light housing so I could replace the bulb, nor did I have any idea which bulb to buy. The manual for this model descibes how to replace the underside lighting but they seem to have left out instructions about the interior. I watched the short "how-to" video on this site, bought the bulb that was described and replaced the bulb in five minutes without any issues.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Socorro, NM
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Quit working
Just like the directions said. Very simple.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lois from Sarasota, FL
Parts Used:
WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The glass microwave turntable for the microwave was dropped and it brokd.
Opened the box, put the glass turntable on the center fitted over the three little bumps.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PSA2201RSS01
106 - 120 of 156