Models > JES1033BB01 > Instructions

JES1033BB01 General Electric Microwave - Instructions

Jump to:

All Instructions for the JES1033BB01
61 - 75 of 83
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michael from East China Township, MI
Parts Used:
WB27X10928
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
All power to the microwave went out.
PartSelect had helpful repair instructions on-line which made the repair easier and faster. Unfortunately, there were other problems with the oven that immediately blew the new fuse I had just installed. It was then determined that additional repair would most likely cost almost as much as a new microwave.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from New Castle, IN
Parts Used:
WB06X10095
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Rotating Ring Guide
The groove inside the microwave that the rotating ring guide traveled was rusted due to moisture; the rusted groove caused the rotating ring guide to lag, putting pressure on the ring guide until it broke. I sanded the rusted area and repainted. The interior of microwave looks like new and the rotating ring guide now has a smooth surface to rotate. The ring guide was very simple to install without any tools.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Roanoke, VA
Parts Used:
WB26X32629
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Microwave would not heat
I went on line, put in microwave repair and watched a video on repair. I then took the oven down from over the range and took it apart. I could see were the magnetron had burned out. There was a hole with obvious burn marks. I went on line looking for the needed part. I clicked on PartSelect and order the magnetron. I received the part within three days, regular shipping. As I had not put the oven back together it took only a few moments to save 150 to 200+ dollars. I put it back together and happy, happy me, it worked.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Socorro, NM
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Quit working
Just like the directions said. Very simple.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Aldeen B from Hayward, CA
Parts Used:
WB49X10140
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken glass tray
replaced it.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JES1033BB01
61 - 75 of 83