JVM1640BJ03 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from Bradenton, FL
- Parts Used:
- WB56X10524
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
no back plate 2 mount
mtg plate came and the rest was easy,did wiring in upper cabinet 4 microwave,drilled 1 1/8 hole in btm of cab 4 power cord 2 go thru.All this was done by common sence and a tape measure,no templates were with this unit (YARD SALE)GE1600,3 bolt holes 2 hold micro upafter installing on back plate,plugged it in and it worked! end of story.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edwin from New York, NY
- Parts Used:
- WB27X10928
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
No heat
Replace the fuses
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mack from Jacksonville, FL
- Parts Used:
- WB27X10928
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
No heat.
Replaced the fuse. Result; did not fix the problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Sioux Falls, SD
- Parts Used:
- WB06X10564
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken turntable coupler
Remove and installed new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephanie from Kernersville, NC
- Parts Used:
- WB27X10928
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
microwave won't heat
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Keizer, OR
- Parts Used:
- WB55X10813
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The front door decritive trim frame broke off
FIRST OFF I'd Like to say. I phoned my cities Appliance Repair Specialist. He didn't return my call. I rephoned and got him. Told him I need the Door frame. He said GE would make me buy the entire door so just by a new Microwave from him. I went online and this was the first sight I found. Typed in my Make and model number and up popped a scematic. I hit on Door and there it was all layed out in pieces. I hit the front door frame and BOOM Payed for it and two days later it was here. BRAVO to you folks. Since most of the front trim frame had fallen off I just had to pull a little around the outer edges to get the rest of it off. I noticed when I ordered the New Part from you that the front door handle was held on by two screws from the backside of the door. When I looked and couldn't see them I knew they had to be under the inner plastic frame work on the backside of the door. SO I kind of pulled on it at various places around it's edges and it started to pop OFF and I worked it off. Removed the screws and handle that held that last part of the front trim frame. Snapped in the new one. Reinstalled the door handle and snapped the rear door panel back on and it was DONE!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from Pensacola, FL
- Parts Used:
- WB49X10176
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
turntable broke
No repair involved, just replaced......looked online and ordered, thought it would take 4-5 days, came in perfect condition within TWO 2 days. awesomeness
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Earl from New Philidelphia, OH
- Parts Used:
- WB24X10047
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave would turn on ,BUT turn table would not turn and oven would not heat.
Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Medford, NJ
- Parts Used:
- WB07X10967
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Grill vent broke and fell off.
Microwave had to be dropped down about 3 inches from the mount,two upper screws removed replaced old vent with new and replaced screws but didn't make them too tight.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry from Purlear, NC
- Parts Used:
- WB55X10813
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Outer door panel was broken for the second time
The door comes off fairly easy. Removed the snap on plastic cover. This could be easy to break. The center part of the door just snaps out but the glass is a bit difficult to get out and back in. You have to pull the new panel out some to get the glass in without pulling to hard to avoid breaking the new one.Once the glass is in you simply snap the center part back in and screw the handle back on. Then snap the plastic cover back in and hang the door back on the unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ralph from baton rouge, LA
- Parts Used:
- WB55X10813
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
broken door frame (3rd time)
Lift the door off set on thick towel and carefully slip the knife around the back edge of the door and pop it off and then unscrew the handle and unclip the front panel slowly and replace. Get an illustration of the layered parts from the partslect website. Be patient as the glass is a tight fit and will be a pain. Good thing is that it is an original GE part, not cheap knockoff although the GE door design is rather dumb so that it should break this maney times with no kids using it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sam from Chandler, AZ
- Parts Used:
- WB24X10047
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
When trying to run, intermittently, the light would come on but the tray wouldn't rotate or cook. When the door was open, the tray would intermittently rotate.
I pulled out the unit and found 2 interlock switches that are depressed when the door closes. After cycling the door open/closed I found that one of the switches occasionally would stay depressed. The repair was easy (after I took off the panels so I could get to the switch) I simply removed 2 screws that attached the interlock switch assemblies to the main unit. Then I popped out the defective switch and popped in the new one. This did indeed fix my problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ursula from Centennial, CO
- Parts Used:
- WB49X10176
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Glass plate.
No installation was required...I simply placed the glass plate replacement inside of my microwave oven.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Alplaus, NY
- Parts Used:
- WB15X10120
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door handle broke
after ordering handle-R, I needed handle-L also, not knowing the handle was two pieces. hardest part was putting the two pieces of handle together.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonnie from Lutz, FL
- Parts Used:
- WB49X10176
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken turntable
just opened the microwave door and inserted tray
Was this instruction helpful to you?
Thank you for voting!