Models > JVM1640WJ01 > Instructions

JVM1640WJ01 General Electric Microwave - Instructions

Jump to:

All Instructions for the JVM1640WJ01
91 - 105 of 132
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Janet from Fairview, TX
Parts Used:
WB02X35607
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dirty charcoal filter
Open vent, removed old filter, inserted new filter.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lucrecia from Bothell, WA
Parts Used:
WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken glass tray
Replaced the tray.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Socorro, NM
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Quit working
Just like the directions said. Very simple.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Dittmer, MO
Parts Used:
WB06X10689, WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing parts
open box and installed
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lois from Sarasota, FL
Parts Used:
WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The glass microwave turntable for the microwave was dropped and it brokd.
Opened the box, put the glass turntable on the center fitted over the three little bumps.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Crab Orchard, WV
Parts Used:
WB15X10122
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door handle broke
Had to pry off trim inside door to expose screws that hold the door handle. Installed handle and snapped trim back in place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Whites Creek, TN
Parts Used:
WB55X10828
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Outer frame cracked microwave door
Easy repair, easier than I thought. Extremely happy
Was this instruction helpful to you?
Thank you for voting!
Customer:
Douglas from Chelsea, AL
Parts Used:
WB06X10359
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Our Microwave was missing the grease filters
Ordering was easy and instillation even easier
Was this instruction helpful to you?
Thank you for voting!
Customer:
linda from anderson, SC
Parts Used:
WB55X10828
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
had a crack in the left side and since i am selling the house, I needed it to look pristine.
I took off a couple of screws, slipped off the damaged part and then very easiy snapped the new part on. Everything fit! I am not a mechanic, so I really appreciate it when the job goes smoothly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephanie from Kernersville, NC
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
microwave won't heat
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from Pensacola, FL
Parts Used:
WB49X10176
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
turntable broke
No repair involved, just replaced......looked online and ordered, thought it would take 4-5 days, came in perfect condition within TWO 2 days. awesomeness
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from La Jolla, CA
Parts Used:
WB55X10828
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Plastic door frame broken
Remove vent above door by pulling out top and squeezing the top and bottom of vent together to unhook the bottom. Lift door off of hinge pins, may need to pry a little to clear the top of the pins. Carefully pry off black inner plastic liner and remove door handle screws. Check the new outer door frame to make sure that all the excess plastic has been removed - mine had a plug of plastic that interfered with the frame fit. Put the door handle back on before positioning the glass. Put the black plastic liner back on and make sure it is flush. Gently tap the edges of the outer door frame to fully seat the glass in the plastic frame. Put the door back on the hinge pins and re-install the vent.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Earl from New Philidelphia, OH
Parts Used:
WB24X10047
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave would turn on ,BUT turn table would not turn and oven would not heat.
Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tracy from Paso Robles, CA
Parts Used:
WB55X10828
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
plastic frame (white) cracked on bottom causing glass to slide down
Pop out inner frame on inside of door with small screw driver. Take off door handle two screws. Pop off old outer frame from inside tabs. Slide out glass and install in new frame carefully not to crack new door frame. Snap on to door and install door handle then inner frame.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sam from Chandler, AZ
Parts Used:
WB24X10047
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
When trying to run, intermittently, the light would come on but the tray wouldn't rotate or cook. When the door was open, the tray would intermittently rotate.
I pulled out the unit and found 2 interlock switches that are depressed when the door closes. After cycling the door open/closed I found that one of the switches occasionally would stay depressed. The repair was easy (after I took off the panels so I could get to the switch) I simply removed 2 screws that attached the interlock switch assemblies to the main unit. Then I popped out the defective switch and popped in the new one. This did indeed fix my problem.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JVM1640WJ01
91 - 105 of 132