Models > JE1860BH02 > Instructions

JE1860BH02 General Electric Microwave - Instructions

Jump to:

All Instructions for the JE1860BH02

Customer:: Sam from Chandler, AZ
Parts Used:: WB24X10047
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

When trying to run, intermittently, the light would come on but the tray wouldn't rotate or cook. When the door was open, the tray would intermittently rotate.

I pulled out the unit and found 2 interlock switches that are depressed when the door closes. After cycling the door open/closed I found that one of the switches occasionally would stay depressed. The repair was easy (after I took off the panels so I could get to the switch) I simply removed 2 screws that attached the interlock switch assemblies to the main unit. Then I popped out the defective switch and popped in the new one. This did indeed fix my problem.

Was this instruction helpful to you?

Customer:: Fran from Geyserville, CA
Parts Used:: WB49X10135
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Glass cooking tray was cracked

I ordered a new one by calling the 800 number, gave them my model number and ordered a new one on the phone and paid with my credit card. It was shipped the same day and I received it on the second day by Fed-X.

Was this instruction helpful to you?

Customer:: Norman from Raleigh, NC
Parts Used:: WB06X10567, WB06X10210
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins

Cover stirrer melted because microwave was left on with nothing in it.

I only had to snap the parts into place

Was this instruction helpful to you?

Customer:: Stephanie from Kernersville, NC
Parts Used:: WB27X10928
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

microwave won't heat

bought a fuse but that didn't solve the problem. Guess I need a new microwave

Was this instruction helpful to you?

Customer:: Kristy from Blue Bell, PA
Parts Used:: WB49X10135
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The glass turntable was cracked in half

I removed the new tray from the box and slid it into the microwave. That's it.

Was this instruction helpful to you?

Customer:: Henry Lindsey from Slidell, LA
Parts Used:: WB26X10143
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Turn plate started making clicking noises and eventually stopped turning

It was extremely easy. I put the microwave on my table upside down and could see the motor thru the holes in the bottom cover. It appeared as though the outside skin had to be removed to access the motor but after looking at it there is an access panel I did have to cut it loose. Not bolted on. There was a message stamped into the bottom case next to the panel that said to debur after panel is removed. So I cut it loose on 3 sides was able get to the one screw swap the motor and reinstall it in about 5 minutes. It works like new What an easy and quick repair. Thanks

Was this instruction helpful to you?

Customer:: David from Roanoke, VA
Parts Used:: WB26X32629
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Microwave would not heat

I went on line, put in microwave repair and watched a video on repair. I then took the oven down from over the range and took it apart. I could see were the magnetron had burned out. There was a hole with obvious burn marks. I went on line looking for the needed part. I clicked on PartSelect and order the magnetron. I received the part within three days, regular shipping. As I had not put the oven back together it took only a few moments to save 150 to 200+ dollars. I put it back together and happy, happy me, it worked.

Was this instruction helpful to you?

Customer:: Tammy from Buckeye, AZ
Parts Used:: WB49X10135
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Renter broke the tray

Very easy you just have to make sure that the tray is in the groves for the wheels :)This is the best place to shop as I have used them on all kinds of appliances and they have never let me down when it comes to price and delivery time!

Was this instruction helpful to you?

Customer:: Michael from Littleton, CO
Parts Used:: WB24X10047
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers

Door Interlock Switch Failed

Removed cover, diagnosed problem, ordered part from Parts Select, received part in 2 days, replaced part, tested and replaced oven into built in space.

Was this instruction helpful to you?

Customer:: Kenneth from Richmond, TX
Parts Used:: WB26X10143
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The problem I had with the Microwave Oven was noise when Plate was rotating

After contacting GE support I realized the only interest they had in helping me was to recommend sending a $$$ technican to diagnose the problem. I decided to go to the Sears Parts select website.to see if others were experiencing the noise me microwave was making. After reading through others posting on the subject I decided to purchase the Synchronous Motor. While waiting for the part to come I decided to lubricate the hub of the spides that rotates the plate with white Lithium grease. After a couple of times utilizing the microwave noise went away so whn the part arrived at me home I put it in a drawer just incase I need it a some future date. Hope that someone else finds this information useful. "The Crafty Dodger in Houston"

Was this instruction helpful to you?

Customer:: Michael from East China Township, MI
Parts Used:: WB27X10928
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

All power to the microwave went out.

PartSelect had helpful repair instructions on-line which made the repair easier and faster. Unfortunately, there were other problems with the oven that immediately blew the new fuse I had just installed. It was then determined that additional repair would most likely cost almost as much as a new microwave.

Was this instruction helpful to you?

Customer:: Mohammad from Piscataway, NJ
Parts Used:: WB27X10928
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Powered Off completely

After reading reviews that there was no power what so ever and a fuse replacement will solve the problem, I tried it. Replacing the fuse is very easy (and I am not handy at all). All you have to do is remove the microwave cover from the top by removing two screws, slide the cover to the left and pulling the cover off. Then remove the grill in front of you, by removing one or two screws. The fuse is in front of you, use pliers and be firm but gentle. Replacing the fuse is easy but it did not solve my problem.

Was this instruction helpful to you?

Customer:: William from Socorro, NM
Parts Used:: WB27X10928
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

Quit working

Just like the directions said. Very simple.

Was this instruction helpful to you?

Customer:: Marissa from Cypress, TX
Parts Used:: WB49X10135
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

I broke my microwave glass cooking plate.

I received my replacement and it is perfect! Thank you so much for for your fast shipping and delivery.

Was this instruction helpful to you?

Customer:: Earl from New Philidelphia, OH
Parts Used:: WB24X10047
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Microwave would turn on ,BUT turn table would not turn and oven would not heat.

Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Was this instruction helpful to you?

All Instructions for the JE1860BH02