CVM919M2N1S5 General Electric Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jared from SIERRA VISTA, AZ
- Parts Used:
- WB02X11550
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Had to replace charcoal filter
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from SAN ANTONIO, TX
- Parts Used:
- WB02X11550
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Charcoal Filter replaced
Open the microwave door, push the press and release door that is located across the top of the oven. Remove and replace filter, close access door, close microwave.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doug from CHALFONT, PA
- Parts Used:
- WB02X11550
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Warning light came on to replace
Ok. Surprised I was sent a damaged part. Box was intact but the aluminum frame was bent. Looks like I received a factory reject. I was able to make it fit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juan from FONTANA, CA
- Parts Used:
- WB27X11210
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
My microwave started tripping the breaker
Yes, it started tripping the breaker and at the end it wouldn't work at all, I started checking continuity on all door switches everything checked good, then I proceeded to check the thermostats and found out that one didnt have continuity so I replaced it. Every thing works good except that as soon as I pluged the microwave to the outlet the exhaust fan comes on and does not shut off. Does anyone known why or do I need to change something else.
Thanks
Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from RIVER EDGE, NJ
- Parts Used:
- WB02X11550
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Carcoal Filter indicator light on
Loosened screw on top of filter
Removed and replaced filter
Removed and replaced filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MS Bettie J from RIVERDALE PK, MD
- Parts Used:
- WB02X11550
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed filter
Open main door at the top is small door open take out old filter and replace newone
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from SUMMERFIELD, FL
- Parts Used:
- WB06X10625
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
noisy microwave turntable
I never knew why it made noise till I looked at the break down on this web site and found it was missing rotating ring since it was new. But unfortunately, I never received turntable ring which was ordered on 12/19/2022 now its tracking says Wednesday, 12/21/2022
9:36 AM
In transit
CAMP HILL, AL it has been stuck there all this time still not on its way to Florida. I don't understand did fedx put on southwest airlines?
9:36 AM
In transit
CAMP HILL, AL it has been stuck there all this time still not on its way to Florida. I don't understand did fedx put on southwest airlines?
Was this instruction helpful to you?
Thank you for voting!