JES1656W General Electric Microwave - Instructions

I just wanted to let you know that the order for the microwave parts was great. They were the exact parts not a cheap knock off but the exact part. In less than 24 hours after starting to look you up on line to the time I finished the replacement was just a little less than 24 hours. I checked two suppliers close to our house and the parts weren’t in stock and would take 3-5 days for them to get them in. Not only did you do it quicker and no trips to order and pick up the parts but you were less by a little. Thanks again. I don’t normally contact someone like this but this was exceptional.I would replace the rotating ring guide every time a motor is replaced. Mine had a minor flat spot on one of the white wheels that was draging and wore the motor out. The new parts work great.

Repairs went great with no issues. It took me longer to clean up the area and interior of the microwave. Dust goes everywhere when fans are used to cool and move the air.

It was extremely easy. I put the microwave on my table upside down and could see the motor thru the holes in the bottom cover. It appeared as though the outside skin had to be removed to access the motor but after looking at it there is an access panel I did have to cut it loose. Not bolted on. There was a message stamped into the bottom case next to the panel that said to debur after panel is removed. So I cut it loose on 3 sides was able get to the one screw swap the motor and reinstall it in about 5 minutes. It works like new What an easy and quick repair. Thanks