Models > JVM250WV01 > Instructions

JVM250WV01 General Electric Microwave - Instructions

Jump to:

All Instructions for the JVM250WV01
16 - 30 of 44
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Darenda from Houston, TX
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The handle broke at the bottom.
I removed the existing screws and removed broken handle. Wa able to still use existing screws and install new handle. Very easy.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elizabeth from Santa Rosa, CA
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door handle broke
I removed the one screw, the other end was broke. Replaced the handle. At first it didn't screw in tight, so I turned it around and put in both screws and bingo, good as new. Thanks for your quick response. Was simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerard from Naples, FL
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken door handle
Real easy------Removed two screws, handle & replaced same.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jorge from Pleasanton, CA
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
the handle was broken
just screwed the new part
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Concord, MA
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Microwave oven handle broke loose at bottom of door.
Philips Head #2. Two srcews out....two screws in. A perfect fit!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vance from Alexandria, VA
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The door handle on my Space Saver Microwave broke at the screw mount
It was very simple...there were two screws on the inside of the door that held the handle. Removing the screws was easy and the new handle lined up perfectly. I replace the screws and the whole event took less than 15 minutes. The handle arrived from PartSelect the day after I ordered it and even though they had projected 3-5 days for delivery.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steven from wilsom, NC
Parts Used:
WB15X322
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
handle didn't come w/new screws
I had to shim the outside to get the door tight,the original screws are longer than what the current handle requires.For the price ,new screws should be a part of the package.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dale from Michigan City, IN
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
microwave door handle was broked
I removed the old handle and replaced it with the new handle. Using the two screws from the old handle. It took about 5 minutes to complete the job.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Hugh M. from Overland Park, KS
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken handle on the microwave
Removed the 2 screws at the inside of the microwave door-can't miss them, removed the handle. I think it took more time to clean the area around the handle on the front of the door than it did to replace it. Anyway, held the new handle in place and re-attached the 2 screws and it was done.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lillie from Franklinville, NC
Parts Used:
WB15X322
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Screws with appliance seemed a little big for holes in new handle
First I removed the two screws that held the handle on. Then I laid the handle down in the way it was on the microwave to be sure I didn't put the new handle on up side down. It appeared only one way to put the handle on. The screws were a little difficult to screw in all the way. First time doing something like this and I was afraid I'd break the new handle. So I had my son to help. No problem once the handle was attached properly. Thank you so much for the quick delivery. The handle works perfectly now.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
kim from yarmouth, ME
Parts Used:
WB15X322
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
replaced old microwave handle
Had to use a hammer and small screwdriver to remove some of the old plastic. If I had a small drill that would have worked better. Once I got that off is was easy to unscrew the old screws and replace the handle. It fit perfectly.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Hillcrest, NY
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
broken handle
Screwed new one in...very impressed with delivery. Part came the next day!

Thanks!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Philip from Sunset Beach, NC
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken door handle on microwave.from fair wear and tear.
Used a Philips screw driver and removed the broken handle.Installed new handle using existing screws.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Byron Center, MI
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The door handle on the microwave broke off.
Finding your site was very easy and easy to use. I received the handle within 2 days and had it installed within less than 10 minutes. Very easy operation. Thanks.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
james from pittsford, NY
Parts Used:
WB15X322
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
handle broke off
pulled out screws and put on new handle. Cake!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JVM250WV01
16 - 30 of 44