CPLMZ169GCC Frigidaire Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Greg from Brighton, MI
- Parts Used:
- 5304441374
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave door handle broken
After trying to bend parts that do not bend I realized you need to remove the plastic gasket around perimeter of microwave door but leave it loosely hanging on (pry off with screwdriver) With the gasket removed you can fit the door on and the snap the gasket back in place before closing and testing. The door was a perfect fit, it works great. The door will not go on until you remove or bend back that gasket. It's not obvious how or where to remove but just put a screwdriver in there and you'll feel it pop out and it snaps right back in after assembly..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ena from New Caney, TX
- Parts Used:
- 5304441374
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken handle
on the inside of the door we gently pried off the liner to get ot the hinges ,lifted off the old door, place the new one on ,then carefully popped the inside liner back in place. Door fixed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Carlyle, IL
- Parts Used:
- 5304441374
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door broken
The new door is slightly different than the one I replaced. To install the new door, I had to remove the plastic "frame" on the new door with a small flat head screwdriver. Then, I could easily mount the door to the hinges on the microwave. Once on the microwave, I clicked the frame back into the door and it was good as new!
Was this instruction helpful to you?
Thank you for voting!