FGMV176NTFC Frigidaire Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Arthur from LUTZ, FL
- Parts Used:
- 5304509460
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave tripped circuit breaker when turned on
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOSEPH from MIAMI, FL
- Parts Used:
- 5304509457
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Power would not come on, would trip breaker when connected.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from HICKSVILLE, NY
- Parts Used:
- 5304509621
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
needed glass Cooking Tray
I Put The New Tray In the Microwave
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Derek from JOPLIN, MO
- Parts Used:
- 5304509475
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Thermostat bad....but couldn't fix it
My grandfather who is well versed as an electrician checked my microwave out because it wasn't worked. He used a multimeter to check electric current to parts in the microwave. He said a specific thermostat was not getting any current going through. I ordered that replacement part from this site and when it came in it didn't have current running through it either. He said he thought the part that was given to me was faulty. I called this companies number to ask some questions but the machine said they aren't taking any inquiry calls because of the pandemic right now. So I currently don't know what the problem is with my microwave. I want to return the part but unfortunately during Christmas time the packaging got thrown away. So as of right now I'm out the part money and probably money to buy a new appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from MAMARONECK, NY
- Parts Used:
- 5304509475
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
I checked the new thermostats for continuity and there was none, so ordered one.
The new thermostats also did not have continuity between it's terminals.. so I ordered a second one.. it also did not pass for continuity.. before returning both I installed one and it worked.. so am not sure why continuity is the recommended test to find the original problem..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ARNEL from WAUKEGAN, IL
- Parts Used:
- 5304509460
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Pressing the start, microwave will start and dies out. Electric is tripping.
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel.
Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of the work is easy.
Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of the work is easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- anthony from elkhart, IN
- Parts Used:
- 5304509479
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Microwave Would Not Heat Up
Unfortunately for us, it wasn't the diode that needed to be replaced. The instructions that were given on how to discharge the capacitor before working on the diode, magnatron or capacitor itself, was very helpful. You don't need to be and electrician if you can follow directions. Ours ended up being the magnatron. It took about 15 minutes to swirch out. I had to buy yhe part thru another site, because it was $40. 00 Dollars cheaper and the part was here in one day. Thanks for the information on the repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christopher from CARY, NC
- Parts Used:
- 5304509435
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
Cover needs replacing
You have to be very careful because the wave guide cover is very brittle. It needs to be bent very gently in order to fit the four ends into each slot. I would highly recommend buying two just in case the first one breaks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sean from BETHESDA, MD
- Parts Used:
- 5304509479
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Replaced the capacitor. Microwave worked for a few days and then lost heat.
Replaced the diode next to the capacitor. If you replace a capacitor, replace the diode while your in there so you don't have to disassemble and reassemble twice.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- deanna from old town, ME
- Parts Used:
- 5304509435
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced cover
I thought the cover was suppose to come off from the inside of microwave. It is brand new and got bent. So I ordered a new one in case it was not working with a bend in it.
Was this instruction helpful to you?
Thank you for voting!