Models > EI30BM5CHSA > Instructions

EI30BM5CHSA Electrolux Microwave - Instructions

Jump to:

All Instructions for the EI30BM5CHSA
16 - 25 of 25
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dwight from Galesburg, IL
Parts Used:
5304468156
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
the transformer started to smoke very badly while in use
I removed the cover and was able to see the burned up transformer. I removed the transformer and did a yahoo search for the part. I found you guys and ordered the part. the part arrived as advertised and I installed it. The microwave has been working now for 2 weeks. One word of advice make sure to use masking tape and mark the wire hookup locations. I used my Blackberry movie as well before I removed the old transformer. I was able to see the wire hookup locations when it was time to reinstall.
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
adam from new orleans, LA
Parts Used:
5304493153
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Power, light, and clock work, micro/turntable not working
Much like the other post: 1. Removw vent case on top (3 screws) 2. Remove cover with control buttons (1 screw). 3. Removed bottom relay switch and replaced. Tight working space so be patient. Took 15 minutes Needle nose pliers used to crimp connector onto switch
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harry from Cypress, TX
Parts Used:
5304493153
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Instructions did not match the assembly of the ice maker.
I managed to move the auger far enough to allow me to insert the cup-drive and then realign the auger with the new cup-drive. I also have had one to break very shortly after installing it. This is my second part to replace and this one went really smooth, since I understood that the initial parts installation instructions did not apply on my ice maker.
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Zbigniew from Merritt Island, FL
Parts Used:
5304537401, 5304467717
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing parts
replaced
3 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark A. from South Lyon, MI
Parts Used:
5304477241
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The Louver Assembly broke at the connections
Very simply replacing a the part in 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the EI30BM5CHSA
16 - 25 of 25