RW635TP1191301M Amana Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bill from Billings, MT
- Parts Used:
- R0154048
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Turntable motor was fired due to poor design of MWO, nothing keeps boilover out of the motor.
Unplugged the MWO from the receptacle. Cut the access plate from under the MWO, unscrewed and removed the old motor. Unplugged the two leads from the old motor and plugged them onto the new motor, screwed the new motor in place, secured the access plate with a tek screw. VOILA, MWO again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jennifer from Rainier, OR
- Parts Used:
- R0154048
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Turntable gears stripped out, quit turning
I ordered the part on Thursday and received it the following Tuesday morning.
Taking the cover off the bottom of the microwave was really the biggest part of getting this done. There are a couple of special screws on the back that a regular screwdriver won't fit into, but I got them off with a pair of needle-nose pliers.
Unplugged the motor, took out one screw, lifted off the bushing inside the oven and just reversed the process to install the new motor. Piece of cake!
Putting the cover back on is the most time-consuming part, do it in the right order and finesse it.
Food is going quietly around now!
Taking the cover off the bottom of the microwave was really the biggest part of getting this done. There are a couple of special screws on the back that a regular screwdriver won't fit into, but I got them off with a pair of needle-nose pliers.
Unplugged the motor, took out one screw, lifted off the bushing inside the oven and just reversed the process to install the new motor. Piece of cake!
Putting the cover back on is the most time-consuming part, do it in the right order and finesse it.
Food is going quietly around now!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- robert from armada, MI
- Parts Used:
- R0154048
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
turntable inop
replaced turntable moto
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from San Diego, CA
- Parts Used:
- R0154048
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave turntable quit.
Unplugged microwave (make sure you do this!) Removed screws along front bottom of microwave, dropped panel enough to get to the motor. Motor is held on with two srews, take them out and remove the two spade terminals to motor. Reverse directions to install.
Piece of cake.
Piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joann from Birmingham, IA
- Parts Used:
- R0154048
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
would not rotate
removed bottom panel removed old motor and replaced
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Ada, MI
- Parts Used:
- 8009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
light bulb went out in my oven
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- peggy ann from forest city, NC
- Parts Used:
- 8009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replaced oven lightbulb
very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Las Vegas, NV
- Parts Used:
- 8009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Light burned out in upper oven
Screwed in light bulb and glass protector
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Phoenix, AZ
- Parts Used:
- 8009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bulb Replacement
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Grant from Alexandria, VA
- Parts Used:
- 8009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this instruction helpful to you?
Thank you for voting!