ACO1560AW Amana Microwave - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Theresa from OVERLAND PARK, KS
- Parts Used:
- 8206232A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burned out bulb
Husband replaced the bulb
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Lee from LK FOREST PK, WA
- Parts Used:
- WP8172138
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Tray got chipped on the corner
ordered a new tray
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vincent from CHICAGO, IL
- Parts Used:
- WPA3073101
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light over range burned out
Philips screwdriver
Removed screw (1)
Removed light bulb
Put in new light bulb
Closed door to bulb compartment
Returned screw.
Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/delivery was fast. No need to have spare on hand.
Removed screw (1)
Removed light bulb
Put in new light bulb
Closed door to bulb compartment
Returned screw.
Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/delivery was fast. No need to have spare on hand.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from PITTSFORD, NY
- Parts Used:
- WPA3073101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
No problem
I had a son put in the new light bulbs. Rather simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Arlington, VA
- Parts Used:
- WPW10273649
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic latch to lock the microwave door broke.
Did an online search for repairs and found PartSelect. Simple to order the part and had it installed myself less than a week later. Thank you!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LENNARD from BURNSVILLE, MN
- Parts Used:
- 4392027
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Would not start
Watched a you tube video prior to installing new switch. Followed the video which gave me confidence i was up to the task. After removing the touch pad I found my design was not exactly like the you tube model but I found the defective switch, replaced it and put the microwave back together. Works great. Again watch the videos
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from PEORIA, AZ
- Parts Used:
- WP8183507
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Microwave light, turntable, and heat were not working
Remove from cabinetry, take cover off and had a very difficult time removing the plastic form that has the switched in. Replace the lowest of all the switches, and then again very difficult time getting the plastic form back in. Some of the plastic even broke during the process but not any that could prevent it from working as it did before. I had ordered a fuse, 2 packs of 2 switches as there are 3 switches but only had to use 1 to get it working again. Tested after switch install, put the cover back on and reinstalled in the cabinet.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Phillip from PITTSBURGH, PA
- Parts Used:
- WPW10207571
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Turntable didn't turn
Dropped the microwave bottom cover removed motor and installed new one. Prior to putting bottom cover back on took time to give it a good cleaning.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert C from GROTON, CT
- Parts Used:
- W10183473
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
wheels on roller wear worn out
did not have listing for part, measured dia. found very close fit. ordered part. placed under plate works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael J from LORAIN, OH
- Parts Used:
- 8206232A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burned out light bulb which lit the surface of the range.
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mrs Ruth V. from CHICKASHA, OK
- Parts Used:
- W10864204
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Filter needed replacement after food burn in oven. Odor awful.
After reading oven manual , used screwdriver to remove appropriate screws from behind vent. Slid vent out then cleaned vent with dish liquid. Removed old filter by simply sliding it out from easily accessed position. Inserted new filter. Replaced vent with screws. Could not have been easier, no more than fifteen minutes to complete job.Very pleased to have received replacement filter in four days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roland R from NORTH ANDOVER, MA
- Parts Used:
- 8206232A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lightbulb burned out
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert W from Whittier, CA
- Parts Used:
- 59001081
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Outside door frame broken (second time)
The outer glass on the microwave door seems to be to heavy for the plastic frame and the frame breaks on the lower left hand corner. I am trying to correct this by supergluing the glass to the plastic frame that's being replaced in hopes that the glass will support the frame. This is why the job is a bit difficult and lengthy.
1) Remove the upper louvered grill from the top of the microwave.
2) Open the door 90 degrees and lift up, the door it will come off the hinge pins, hold on to the door or it will fall on the floor.
3) Lay the door outside face down. There are openings around the hinge plates, use a screw driver or a small lever to reach thru these holes and carefully start to pry the black plastic frame from around the inside door glass. Once the frame is up far enough to get a dull knife blade under the frame pry carefully all around and remove, this is probably the most difficult step.
4) Remove the two or three Phillip's head screws that hold the handle on and remove the handle.
5) Now the outside frame can be levered off the main metal door frame, the outer glass is held in place by the outer frame so use care not to drop it.
6) Clean everything up. This where I use the superglue to hold the glass to the replaced outer frame, I probably wont know for six to twelve months if it does any good.
7) Reverse order to assemble,
8) Luck
1) Remove the upper louvered grill from the top of the microwave.
2) Open the door 90 degrees and lift up, the door it will come off the hinge pins, hold on to the door or it will fall on the floor.
3) Lay the door outside face down. There are openings around the hinge plates, use a screw driver or a small lever to reach thru these holes and carefully start to pry the black plastic frame from around the inside door glass. Once the frame is up far enough to get a dull knife blade under the frame pry carefully all around and remove, this is probably the most difficult step.
4) Remove the two or three Phillip's head screws that hold the handle on and remove the handle.
5) Now the outside frame can be levered off the main metal door frame, the outer glass is held in place by the outer frame so use care not to drop it.
6) Clean everything up. This where I use the superglue to hold the glass to the replaced outer frame, I probably wont know for six to twelve months if it does any good.
7) Reverse order to assemble,
8) Luck
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alfred from summerville, SC
- Parts Used:
- 8206232A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burnt Out Light Bulb Replacement
Open compartment, installed bulb, closed compartment
Was this instruction helpful to you?
Thank you for voting!