Models > 28FA-6CXWV8-94 > Instructions

28FA-6CXWV8-94 Magic Chef Microwave Oven Combo - Instructions

Jump to:

All Instructions for the 28FA-6CXWV8-94

Customer:: Ronald E. from Marissa, IL
Parts Used:: 12001676
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

burners would not come on without moving them around

took old screw out of stove top that held them in and cut the two wires off close to the burner stripped the wires and used the screw caps to put each line together it doesn't matter which line goes where and screwed it back on with the old screw and tried the two burners and they both worked job done ps it took longer for me to type this but i am slow at typing

Was this instruction helpful to you?

Customer:: Vittorio from Wakefield, MA
Parts Used:: 12001676
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Electric surface burner would only turn very hot

Well, I had to search a bit deeper in the internet to find out that the problem was not with the surface burner (which did look a bit burned out anyway) but rather with the surface burner switch (Part Number: PS336885) which must have ben damaged by the heat of the closest burner. If this problem would have been better documented (or if I would have searched more carefully) I would have saved over $40 with parts (Surface Burner Receptacle Kit) that I didn't quite need. Repairing the switch was very easy, thanks also to the available video , even though the stove used on this video (front panel) didn't quite match mine (top-back panel).

Was this instruction helpful to you?

Customer:: Fred from Edwardsville, IL
Parts Used:: WPW10196405, WPW10196406, 12001676
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Receptacle was no longer making good contact.

This worked out GREAT. We were about to purchase a new range when I found the needed parts were available. The stores we had contacted had told us our range was too old to have parts available. I had no problem with installing the receptacle at all. The pans went in easly as excepted. My wife is happy with her NEW arrangement. She does not need to learn how to operate a new range. Thanks for your help. The instructions sent were clear and easy to follow.

Was this instruction helpful to you?

Customer:: Shirley from Londonderry, NH
Parts Used:: 8206232A
Difficulty Level:: A Bit Difficult
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

burnt out light bulb

The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.

Was this instruction helpful to you?

Customer:: Lester from Mesquite, TX
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

Bulb burned out

You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.

Was this instruction helpful to you?

Customer:: Paul from Norristown, PA
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out lightbulb

First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.

Was this instruction helpful to you?

Customer:: Jeremie from Freeland, WA
Parts Used:: WPY04000041
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Easy installation

Unplug stove from outlet!! Removed screws (Phillips head) from prior element and pulled out enough to slip of the red and white wires. Keep in mind which side which is on and take old element out of oven. Put new element in and attach wires back on the same sides. Push back in and use screwdriver (Phillips head) to lift insulation to push wires and element prongs back. Put screws back in, close oven door and plug stove back in. Tested and works great!

Was this instruction helpful to you?

Customer:: Max from Bothell, WA
Parts Used:: WPY04000041
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven would not heat up properly to set temperature

The element appeared to have been damaged. I replaced the element with ease. However, I still have the same problem. The oven does not heat up to the set temperature. Information from the part select website is that it is more likely the long oven sensor. I ordered one and will provide the results after I have this sensor replaced with a new one.

Was this instruction helpful to you?

Customer:: Ray from Gatlinburg, TN
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burned out light bulb

Replaced light bulb.

Was this instruction helpful to you?

Customer:: roger from palm coast, FL
Parts Used:: 8206232A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replace light blub

removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.

Was this instruction helpful to you?

Customer:: Dallas from Arlington, TX
Parts Used:: WPW10196405, WPW10196406
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replace the cook stove's drip bowls instead of cleaning them

I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.

Was this instruction helpful to you?

Customer:: Dallas from Arlington, TX
Parts Used:: WPW10196405
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

I needed to replace to two 8* drip bowls on the kitchen range

(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.

Was this instruction helpful to you?

Customer:: Karen from Kettering, OH
Parts Used:: WPW10196405, WPW10196406
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Stove needed new bowls

Just dropped in

Was this instruction helpful to you?

Customer:: gizella from mays landing, NJ
Parts Used:: WPW10196405
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old dirty drip pans

Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!

Was this instruction helpful to you?

Customer:: Alison from Carnation, WA
Parts Used:: WPW10196405, WPW10196406
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The drip pans needed replacing.

Put in the new drip pan -- which are really nice shiny ones.

Was this instruction helpful to you?

All Instructions for the 28FA-6CXWV8-94