JHP75G*02 General Electric Microwave Oven Combo - Instructions

I first turn off the 220 power braker to the electric stove. Making sure the stove and element is very cool.

I then removed the two screws that hold the lower baking element in place. Pull gently on the element not to break the wires from the wall of the stove (about 3 to 4 inches).

I than unscrewed the right and left wire attached to the element with the nut driver. (This old element was attached with small nut screws. The new one has screws that use a screw driver). Keeping the wires apart, I removed the old element and replace it with the new element part.

In replacing the new element, facing the stove I connected the black wires to the left side (my left hand) and the white wire to the right side (my right hand) with the new screws using a screw driver. REMEMBER TO REPLACE THE WIRES BACK THE WAY THEY CAME OFF WHEN THE STOVE WAS WORKING PROPERTLY. Attach the element back to the stove and turn the breaker on. Easy to do job.

removed 2 screws that hold the element in place, then pulled element out took 2 more screws out and reversed proc. I couldn't have had a better rep to help me find the right part. Thank you

I had a friend of mine who came to my home equipped with screwdrivers and flashlight. After turning off the electricity at the fuse box he removed the oven door (for easier access),removed the screws,pulled out the existing element far enough to disconnect the wires, placed the new one into place, connected the wires, screwed the new one into place
turned the power back on, turned on the oven and after about 15 seconds, the element began to turn from a dark gray to a light color beginning to turn orange.

I was able to slide the stove out from the wall, so it was easier to remove the back cover and disconnect the wiring in back rather than trying to reach into the oven. Then all I had to do was put in the new coil, reconnect the wires and slide the stove back into place.

Firstly a big thanks to Parts Select.com I order the part on a Monday and it was delivered on the Wednesday of the same week!

Firstly I pulled the stove out of the space between the counter tops. Next I unplugged the stove. I opened the oven door unscrewed the two screws holding the element onto the back of the oven. Next I unscrewed the two screws that fastened the wires onto the two ends of the element. The element was then able to be removed from the oven. I then fitted the new element by repeating the same procedures to take the element out. The whole process took me less than 15 minutes.

Unplugged unit.
Removed two screws with nut driver.
Bake element easily disconnected.
Ordered part Tuesday night.
Received e-mail that part was shipped Wednesday.
Part arrived Thursday.
I installed part in minutes. Stove working again.
Anyone could do it.

I ordered the part on Sunday afternoon and it was delivered by noon on Tuesday. I couldn't be more pleased. The service was amazing and the price including shipping was very fair.
I need wheels for the rack in my dishwasher and I plan to order from partselect.com.
With the service I received, I'd recommend Parts Select to my family and friends.

The new element arrived in just 2 days with normal postage. I followed the simple instructions and was cooking 15 minutes later. It couldn't have been easier. Thanks.

Removed the bracket holding the element, slid out the element, disconnected it from the leads, replaced it with your part and reassembed. Oven now works like new.

1-Shut off the breaker
2-Pulled off the oven door for easier access
3-Unscrewed the old element plate
4-Unscrewed the red and black wires from the old element
5-Screwed on the new element to the wires
6-Replaced the screws on the new element plate
7-Turned the power back on

I am a CPA and not real handy at all. But I was able to remove the old element and install the new element in less then 15 minutes. It burned out on Saturday, I ordered new one FED-ex to speed up- received new one, on Tuesday. Very quick, and this was last week, the week prior to Thanksgiving- so my wife really needed our oven. Perfect fit. And I am not related to this company in any way, nor was I paid anything to say this, just happy this worked- or we'd be spending a lot more money.

First we unplugged stove, if wired into circuit shut off in breaker box. Undo four screws on back cover and detach wires from element. Remove oven door by pulling open and sliding it up off hinges. Undo two screws holding element to back wall of oven. Slide in new element and replace screws in back wall. Replace door. Slide wire leads on new element in back, at this point we plugged range in and tested element to see if heating. It worked so we replaced cover, slide range in and leveled it with wedges. Time for pizza.

The repair is simple. Unplug or turn off power to stove. Remove the 2 visible screw where the element connects to the back of the oven. Pull the element with back plate out. The back plate is part of the element. Remove 2 screws that connect wire. Mark which color connects to which lead. Re-assemble in reverse order. Takes about 15 minutes,

The bake element is very easy to replace. Turn off the circuit breaker to the stove. Two screws (1/4" socket needed, not screwdriver) come out to release the plate, then two more screws of the same size to unfasten the element to the stove wiring. Reverse the process to put the new one back in. I let my fourteen year old son do the whole thing. By the way, the photo of the element on the web site did not look like the element in my stove. I called customer support and was assured that it was the proper part. When it arrived, it did exactly match my element. The photo on the web site was incorrect. (Part number PS249466)

Super simple installation. Once power was isolated from the oven, we removed the old bake element which had four nuts/screws. Then we installed the new element, turned the power back on and tested the oven. It worked perfectly! The whole process took maybe 5 minutes.