Models > NNT156GZ3A

NNT156GZ3A (7D11A) Maytag Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for NNT156GZ3A

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$7.60
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by May 29
This 48 cube ice cube tray is eleven inches long. It is all white in color and it is made entirely of plastic.
In Stock
Order now and your part arrives by May 29
Sold individually.
In Stock
Order now and your part arrives by May 29
This is a genuine OEM replacement part. This is a door shelf trim retainer designed for use with refrigerators. The purpose of the retainer is to hold the door shelf in place on the door. This replace...
In Stock
Order now and your part arrives by May 29
Sold individually.
Special Order
$9.79
This is a genuine OEM replacement part. This egg tray is designed for use with refrigerators. This tray fits inside a compartment on the door of your refrigerator, and it holds up to fourteen eggs. T...
Special Order
$21.82
This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.
Special Order
This is an authentic OEM replacement part. This defrost evaporator fan is commonly used in refrigerators and freezers. When the defrost heater is at work melting frost on the evaporator coils the wate...
No Longer Available
This is an OEM part sourced directly from the manufacturer. This is a bushing used in the assembly of refrigerators. This bushing is used alongside the hinge pin, and is designed for use with a ? inch...
No Longer Available
This is an authentic OEM replacement part. This defrost thermostat is designed for used with refrigerators. When evaporator coils start building up frost the defrost heater kicks in to warm them up an...
Special Order
$9.79
This part measures 1/4-20 inch. Sold individually.
In Stock
Order now and your part arrives by May 29
This is an OEM part sourced directly from the manufacturer. This gasket is used on the fresh food portion of your refrigerator. When the door of your refrigerator is shut this gasket works to create a...
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for NNT156GZ3A

Viewing 2 of 2
Leaking
Fixed by these parts
Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Craig from Westminster, CA
Parts Used:
WP61002140
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
cocktails running out of ice
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : )
56 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gilbert from Water View, VA
Parts Used:
WP70048-1
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Old gasket was ripped, damaged
1. Remove food from door
2. Remove bottom hinge from door. Make sure door is supported. Shoulder works nicely for that. 3 hex head screws
3. Drop door down and off. Lay on table.
4. Remove inside door panel. The hex head screws require a 1/4" socket, and there are a lot of them, concealed under a flap of the gasket. L ift off and clean inside door panel.
5. The old gasket peels off. The new one goes on the same way. Place the inside door panel back on the door, and install the screws at the corners first. Make sure that they go thru the holes in the gasket.
6. Lift the door into position. Install the hinge, holding the door. Once it is tight, you are done.
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
C MARTIN from TAMPA, FL
Parts Used:
WP61002140
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace broken ice cube trays
No repair needed. I had only to wash the new ones and use them.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!