Models > 41572

41572 ((ABWESEU)) LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve - Hot – Part Number: 5220FR2006H
$26.80
The hot water valve is found at the back of your washer and controls the flow of hot water into the machine. If the valve is defective, the washer may leak, overfill, fill slowly, or not fill with wat...
In Stock
Magnetic Door Plunger – Part Number: AGM73610701
$24.28
The magnetic door plunger is used on your washing machine to keep the door open when not in use. This allows for the inner door and tub seal to dry thoroughly, which helps to prevent any buildup of mo...
In Stock
Water Inlet Valve - Cold – Part Number: 5220FR2075L
$72.90
If your washing machine is leaking, slow to fill, will not stop filling with water, or is not filling at all, the cold-water inlet valve may be defective. The purpose of the valve is to open to allow ...
In Stock
Tub-to-Pump Drain Hose – Part Number: 4738ER1002A
$41.72
This hose has bellows to allow for flexibility during the wash and spin cycles.
In Stock
BEARING,BALL – Part Number: 4280EN4001C
$63.71
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, th...
In Stock
Gasket – Part Number: 4036ER4001B
$31.60
In Stock
Detergent Dispenser – Part Number: 3891ER2003A
$27.79
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
In Stock
Shock Absorber Kit – Part Number: 383EER3001J
$63.16
This kit includes 1 shock absorber and 2 pins.
In Stock
Washer Hose with Bellows – Part Number: 4738ER1004B
$31.32
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
In Stock
Pump Filter – Part Number: 383EER2001A
$26.76
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your wa...
In Stock
CAP,DRAIN HOSE – Part Number: 5006EN3015A
$8.04
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
In Stock
Hose Assembly,Drain – Part Number: 5215ER2002G
$50.45
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 41572

Viewing 9 of 9
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Does not dispense fabric softener or detergent
Fixed by these parts
Fixing Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing Fixing
How to fix it
No hot or cold water
Fixed by these parts
Fixing
How to fix it
Shaking and Moving
Fixed by these parts
Fixing
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Cold

Replacing the Water Inlet Valve - Cold

Replacing the BEARING,BALL

Replacing the BEARING,BALL

Replacing the Tub-to-Pump Drain Hose

Replacing the Tub-to-Pump Drain Hose

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Omnitech from Warrenville, IL
Parts Used:
AGM73610701
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replac e the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Read less
153 of 169 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leslie from STOWE, VT
Parts Used:
4738ER1002A
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
46 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Northport, NY
Parts Used:
5220FR2075L
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Inlet valve leak
Followed directions on the video and went like a charm. Very impressed with service and video
34 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More