Models
>
74102
74102 (ASWCSE0) LG Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 74102
Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
$15.26
This part includes a single mounting bolt needed to secure the door handle to your refrigerator. This part is commonly replaced because the handle has started to loosen. Try tightening the screw first...
In Stock
Order now and your part arrives by Aug 6
In Stock
Order now and your part arrives by Aug 6
$259.57
This ice maker assembly is for refrigerators. This Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete ...
In Stock
Order now and your part arrives by Aug 6
$24.00
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
Special Order
$15.26
This roller assembly supports smooth movement of racks, drawers, or drums during operation. Reduced friction improves ease of use and reduces wear. Replacing a worn roller restores quiet, smooth movement.
In Stock
Order now and your part arrives by Aug 6
$96.52
This genuine LG refrigerator door gasket helps maintain a tight seal to keep cold air in and warm air out, improving energy efficiency and food preservation. It’s compatible with various LG models and...
In Stock
Order now and your part arrives by Aug 6
On Order
$178.35
Designed for LG French door refrigerators, this ice maker assembly kit includes everything needed to restore automatic ice production. It fills, freezes, and dispenses ice cubes into the bin. Common i...
On Order
$13.07
This roller assembly supports smooth movement of drawers or sliding components, reducing friction and maintaining proper alignment. Designed for durability and consistent performance, it is replaced w...
In Stock
Order now and your part arrives by Aug 6
The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.
In Stock
Order now and your part arrives by Aug 6
In Stock
Order now and your part arrives by Aug 6
$96.52
This door gasket forms a tight seal to prevent air leaks and maintain proper cooling. Replace it if you notice gaps, poor sealing, or temperature issues. A new gasket helps improve efficiency and keep food fresh.
In Stock
Order now and your part arrives by Aug 6
Common Problems and Symptoms for 74102
Viewing 4 of 4Door won’t open or close
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Amber from PEORIA, IL
- Parts Used:
- AEQ72909603
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Icemaker quit releasing ice from tray and water was pouring and freezing in ice storage bin
This couldn't have been easier. Two tiny screws in the front needed unscrewed, and then two plastic clips in the middle just had to be popped lose. Finally, you unplugged the power cord. Then, you just needed to reverse the process by plugging the new ice maker in, popping the clips in place, and screwing the two holes back in and turning
... Read more
the whole thing on. Voila! Perfect ice cubes again. And for only a little over $100.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from WILLIAMSBURG, VA
- Parts Used:
- AEQ72909604, 4510JA3003D
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
No Ice
Unplug the refrigerator and empty the freezer. Remove the lower basket and roll out upper tray. Open the freezer door. I was able to lie on the floor to remove the 2 screws holding the ice maker without removing the
freezer door. Depress the 2 tabs and slide the ice maker forward to remove. Install in reverse order. Change the wate ... Read more r inlet valve at the same time.
freezer door. Depress the 2 tabs and slide the ice maker forward to remove. Install in reverse order. Change the wate ... Read more r inlet valve at the same time.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from WEST ROCKPORT, ME
- Parts Used:
- AEQ72909603
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
needed to replace broken ice maker
Take out 2 screws and unplug unit before removing. Plug-in new unit and screw in 2 screws. That's it.
Was this instruction helpful to you?
Thank you for voting!