Models
>
51593
51593 Leaf Blower / Vacuum
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 51593
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
$17.55
This is a Genuine OEM replacement part designed for use with Blowers/Vacuums. It covers the Impeller. This Inlet Cover is made out of Plastic and it is Sold Individually. No tools are needed to replac...
In Stock
Order now and your part arrives by Aug 17
$23.62
This is a genuine manufacturer sourced replacement part. It is specially produced for Toro handheld blowers and vacuums. This part sits in the blower housing attached to the crankshaft of the engine. ...
In Stock
Order now and your part arrives by Aug 17
$6.51
The impeller washer fits next to the plastic impeller and is made of metal. This genuine item is supplied by the original equipment manufacturer for use with Toro and Lawn Boy blower-vacuums and is so...
In Stock
Order now and your part arrives by Aug 17
$38.78
This is an original replacement part manufactured for use with hand held blowers. This plastic tube directs the air flow out of the blower. Tools are not required to install this part, it snaps into t...
In Stock
Order now and your part arrives by Aug 17
$17.66
This is an OEM replacement part from Toro and Lawn Boy for use in blowers and vacuums. The super tube extension attaches to the blower tube. If this item becomes broken it will need to be replaced and...
In Stock
Order now and your part arrives by Aug 17
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could see the impeller was damaged - blades missing.
Safety First
Note: Ensure the appliance is unplug prior to working on it.
1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and w ... Read more asher- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go.
Note: Ensure the appliance is unplug prior to working on it.
1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and w ... Read more asher- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Dayton, NV
- Parts Used:
- 108-8965
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Original part got lost
Snap and blow
Was this instruction helpful to you?
Thank you for voting!