Models > PB-413T > Instructions

PB-413T (10001001-10999999) Echo Leaf Blower / Vacuum - Instructions

Jump to:

All Instructions for the PB-413T

Customer:: Keith from NORWOOD, NJ
Parts Used:: A369000460
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replace clogged fuel filter.

Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.

24 of 42 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Patrick from Ludington, MI
Parts Used:: A052000470
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Broken Starter pawl Assembly

Took pull cord assembly off to access the starter pawl and took out spark plug put a piece of rope down plug hole to lock cylinder and used pliers to take off starter pawl
Replaced and took out rope and tightened everything and reassembled pull cord assembly and put spark plug back in and complete

Thank you to this site for the Correct Starter pawl assembly

Satisfied Customer

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Benny from BURTON, MI
Parts Used:: 89011804262
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Added extra decals to the tube

Ordered two extra Echo Decals for the front tube. Original was not installed correctly from factory. So I added two extra to make it look better. This was for my ECHO 8010T Leaf Blower. Nice machine..
It looks real nice with four decals on the end..

1 of 5 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the PB-413T