11A-A19Q701 (2012) Yard Man Lawn Mower - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from PHOENIX, AZ
- Parts Used:
- 764-04077D
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Replaced existing grass bag
The bag was slightly larger than the original. So the clips along all sides needed to be trimmed slightly to fit the existing frame. 15 minute fix and it works perfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from San Diego, CA
- Parts Used:
- 764-04077D
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
Bag will not stay in placed when mower is running.
Repair was not effective. I used once and the bag keep getting off or blown out of the mower.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from NORFOLK, VA
- Parts Used:
- 787-01869B-0638
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck undercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from ARLINGTON, TX
- Parts Used:
- 753-08680
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Front axle cover broke
Removed old part and installed new part. Perfect fit.
Was this instruction helpful to you?
Thank you for voting!