Models > 22164 > Instructions

22164 (280000001-280999999 - 2008) Toro Lawn Mower - Instructions

Jump to:

All Instructions for the 22164
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
randy from HIGHLAND, IL
Parts Used:
106-3999, 106-3987
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
6 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
fred from SAN CARLOS, CA
Parts Used:
92153-7020
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Lawn mower poor idle
will look at my lawn mower carburetor i found i needed a couple of gaskets and a fuel primer. you had the part so i order.
after a good carb cleaning and the new parts it now it runs fine.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from ORLAND PARK, IL
Parts Used:
121-9118
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Torsion spring broken
I pryed the apart the torsion spring lever from the handle with a large screw driver. It wasn't easy putting it back, but it worked
1 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 22164
1 - 3 of 3