Models > 96041034600 > Instructions

96041034600 Husqvarna Lawn Mower - Instructions

Jump to:

All Instructions for the 96041034600
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Anthony from OLIVEHILL, TN
Parts Used:
812000029, 532104757
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
27 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from CANBY, MN
Parts Used:
587820301
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set
Worn out Mandrel Assemblies
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wayne from LAKEVILLE, MA
Parts Used:
532439870
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Original shield was damaged
Removed original shield ( 2 bolts), replaced with new shield.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from ROCKTON, IL
Parts Used:
532140294
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set
Broken v-belt for drive
I returned the belt because it was the wrong part. Ordered the correct belt from another source. After that the replacement went well and I crossed off Parts Select from my list.
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Russell from MACON, GA
Parts Used:
582042802, 532193350
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
1 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frederick from BINGHAMTON, NY
Parts Used:
532121749
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
10 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 96041034600
1 - 7 of 7