JVGC535A1 Whirlpool Ice Maker - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Warren from Bath Springs, TN
- Parts Used:
- 2174750
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The ice cutting grid wiring harness had a broken pin
Removed the grid, as when cleaning the evaporator plate. Unscrewed the connections for the old harness, screwed the new one on and re-installed the grid. Nothing to it really
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from Quitman, AR
- Parts Used:
- 759296
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Solenoid in Water Valve failed open
Determined coil was open when fill valve did not allow water to enter the icemaker tank. Checked coil with Ohmmeter, found open, and ordered part. Part came in in quick order and allowed me to replace fill valve and have machine making ice within 4 business days. Nothing like clear ice maker for making really good ice.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brett from Sebring, FL
- Parts Used:
- 759296
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set, Wrench set
No water flow
Turn water off. Remove front panel (2 screws) water valve on bottom right . Easy access .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dean from Anchorage, KY
- Parts Used:
- 4387020
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set
cutting grid wire broke
Bought new wire, strung it end to end and fastened it at each end.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- edward from The Woodlands, TX
- Parts Used:
- 759296
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Water soenoid not working
Replaced with new part. Issue this the third time in about 3 years and I do not know why the part life is so short. Replacement is 5 minutes as the valve is just behind the from panel.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- F Michael from Hot Springs Village, AR
- Parts Used:
- 759296
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
The water valve developed a leak, the plastic housing had cracked.
I turned of the power, unplugged the electrical connection to the valve, disconnected the water inlet and outlet pipes, remover two small bolts that attached the valve to the frame of the ice maker and removed the old valve. The new valve was installed in the reverse order. It was a very easy install.
Was this instruction helpful to you?
Thank you for voting!