Models > 109RB42

109RB42 Hotpoint Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6 Inch – Part Number: WB32X10012
$11.33
If the drip bowls on your range or cooktop have become damaged, rusty, or are missing, they should be replaced. This is a genuine OEM replacement drip bowl that is chrome in color and 6 inches in diam...
In Stock
Order within the next 18 mins and your part ships today!
Drip Bowl - 8 Inch – Part Number: WB32X10013
$17.90
This 8-inch chrome drip bowl is a genuine OEM replacement part for your electric range. The drip bowl is designed to fit underneath the coiled burner elements, and is used to catch spills that result ...
In Stock
Order within the next 18 mins and your part ships today!
Bake Element – Part Number: WB44X5043
$65.15
In Stock
Order within the next 18 mins and your part ships today!
Power Terminal Block Kit – Part Number: WB17X5095
$74.64
This kit comes with the terminal block, nuts and wires.
In Stock
Order within the next 18 mins and your part ships today!
Trim Ring - 6" – Part Number: WB31X50
This 6 inch low rise burner trim ring is intended for use with attached style low rise tilt lock surface mount burners on GE electric ranges.
No Longer Available
DISCONTINUED – Part Number: WB23X5078
No Longer Available
DISCONTINUED – Part Number: WB22X42
No Longer Available
DISCONTINUED – Part Number: WB10X5001
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 109RB42

Viewing 2 of 2
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dennis from Los Alamos, NM
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
The oven's bottom bake element burned up
First I turned the circuit breaker switch off for the stove unit. I then removed the two screws that hold the element in place at the back of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I attached the new element, bolting the wires into place and then screwed the element back into place on the back wall of the oven. I flipped the breaker switch back on, and turned on the oven. I was done in roughly 15 minutes. The most difficult part was having to shine a flash light into the oven to replace the part, and negotiating the hard cold kitchen floor.
Read less
19 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Kiowa, CO
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
The oven element burned completely into.
I first removed the two screws holding the element in place. Then I pulled the element out about 2 or 3 inches and then took out the 2 small screws holding the 2 wires in place. I then removed the old element and discarded it and installed the new one in the reverse order that I took out the old one. It was quite easy to do, only took abo ut 10 to 15 minutes total time.
Read less
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bernard from N CHARLESTON, SC
Parts Used:
WB17X5095
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
no burnt wire
Replace part an wires
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More