Models > HP1351

HP1351 Makita Hammer Drill

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for HP1351

Viewing 1 of 1
Page A Diagram and Parts List for Makita Hammer Drill
Page A
Keep searches simple, eg. "belt" or "pump".
Carbon Brush Set CB-75 – Part Number: CB75
$7.83
If your motor is running poorly, running intermittently, it is likely in need of new carbon brushes. This part includes a set of two carbon brushes with wire leads and brush springs attached. Changing...
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Power Cord – Part Number: 664064-4
$21.97
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Steel Ball 3.5 – Part Number: 216001-0
$4.99
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Retaining Ring S-12 – Part Number: 961052-5
$4.99
Special Order
Ball Bearing – Part Number: 211031-6
$14.83
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Brush Holder 5-8 – Part Number: 643552-4
$4.99
Special Order
Pan Head Screw M4X14 – Part Number: 265099-4
$4.99
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Keyless Chuck – Part Number: 763192-3
No Longer Available
Strain Relief – Part Number: 687063-9
$4.99
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Makita Label – Part Number: 819063-3
$3.99
Special Order
Cord Guard – Part Number: 682569-2
$3.99
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Pin 4 – Part Number: 256251-5
$4.99
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Power Cord

Replacing the Power Cord

Replacing the Power Cord

Replacing the Power Cord

Replacing the Power Cord

Replacing the Power Cord

Replacing the Carbon Brush Set CB-75

Replacing the Carbon Brush Set CB-75

Replacing the Carbon Brush Set CB-75

Replacing the Carbon Brush Set CB-75

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bruce from HILLSBORO, OR
Parts Used:
664064-4
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More